Modem/DSU Commands

Display Line Designator (dsld)

Use the dsld command to display the line designator message stored in a COMSPHERE 3400/4400 Series APL modem. The line designator message is an alphanumeric string (up to eight characters) which can be displayed on the front panel of a COMSPHERE APL modem.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Help Desk, Data Technician, Manager, System Administrator

Abbreviation: dsld

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Change Line Designator (chld)

Display Line Designator Input Form

This input form contains the following field:

Device(s) (Required field)

Enter the device(s) for which line designator messages will be displayed. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

6800-A2-GB31-20

January 1997

2-131

Page 154
Image 154
Paradyne 6800 manual Display Line Designator dsld, Display Line Designator Input Form