Paradyne 6800 manual List Directory lsd, List Directory Input Form

COMSPHERE 6800 Series Network Management System

List Directory (lsd)

Use the lsd command to display the telephone number and the comment portion of a specified directory for a DATAPHONE II modem's AUTOCALL dialer. To change the telephone number, or for complete information on the fields that appear when you execute this command, refer to the Change Directory (chd) command.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level:	Help desk, Data Technician, Manager, System Administrator
Abbreviation:	lsd
	Alternate: lsdir
Restrictions:	This command can be executed only on DATAPHONE II DDD modems.
Routine:	Yes
Schedule:	Yes

Related Commands: Change Directory (chd)

Dial (dial)

Display Telephone Number (dstn)

List Directory Input Form

This input form contains the following fields:

Device(s) (Required field)

Enter the device(s) for which the directory is to be listed. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Directory number (Required field)

Specify the directory whose number should be listed. Valid entries are from 1 through 99.

2-174 January 1997 6800-A2-GB31-20