Modem/DSU Commands

Callback directory

Use this option ONLY for 3400/4400 Series devices with a DBM. This field indicates which directory entry to use for callback. Valid entries are 1 through 4.

A pop-up menu is available listing valid selections.

Option strap area

Use this option ONLY for 3400/4400 Series devices with a DBM. This field determines which strap area to use for certain dialing options when establishing a dial line.

The following are valid entries:

active ± uses the set of options under the currently designated device.

cust1 ± user-defined options.

cust2 ± user-defined options.

A pop-up menu is available listing valid selections.

Disconnect existing call before execution (Required field)

Enter yes to break an existing connection so that your call will go through.

Enter no to prevent the termination of a connection when you initiate a call. If there is an existing connection when you initiate a call, you will receive an error message indicating that the call cannot be placed to the device.

A pop-up menu is available listing valid selections.

Select call originating speed (Required field)

Specify the speed (in bps) at which the call will be originated.

Valid entries are current (uses the current designated speed), 300, 1200, 2400, 4800, 7200, 9600, 14400, 19200, 56000.

For COMSPHERE devices, the only valid entry is current.

A pop-up menu is available listing valid selections.

Dial Command Results Form

The Dial command results form displays device information for each device specified. If the command was successful, a results message indicates the speed at which the connection was made. If the command was unsuccessful, a results message indicates the reason (as returned from the device) for the connection failure.

6800-A2-GB31-20

January 1997

2-107

Page 130
Image 130
Paradyne 6800 manual Dial Command Results Form, Callback directory, Option strap area