Paradyne 6800 manual for Comsphere Device in ADp Mode

Modem/DSU Commands

Page 1

This input form contains the following field:

Device (Required field)

Enter the device whose network address is to be changed. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Page 2 for COMSPHERE Device in ADp Mode

The following input form is displayed when a COMSPHERE device operating in ADp mode is identified on the initial input form.

This input form contains the following fields:

Address (Required field)

Enter the new network address for the device. The valid range of entries for COMSPHERE 3400/4400 Series APL modems, COMSPHERE 3600 Series DSUs and DBMs, and COMSPHERE 3800 Series DDD modems in Advanced mode is from 1 through 256. Refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide for valid addressing conventions.

Carrier (Display field)

Displays the number of the new carrier in which the device resides.

Slot (Display field)

Displays the number of the new slot location of the device.

Number of device profiles to update (Required field)

Specify whether the profile of only the addressed device should be updated, or whether all affected device profiles (the addressed device and downstream/associated devices) should be updated.

Enter 1 to update only the device profile of the selected device.

Enter all (default) to update device profiles of the selected device and all of the downstream devices.

If a 3600 Series DSU has an associated DBM, that DBM's address including the profile is updated.

A pop-up menu is available listing valid selections.

6800-A2-GB31-20 January 1997 2-35