COMSPHERE 6800 Series Network Management System

Display Port Options (dspo)

Use the dspo command to display the port options of one or more COMSPHERE 3400/4400 Series APL modems with MSD/TDM.

For most commands, NMS enables you to specify the destination for the command's results and schedule its execution. If the last page of the input form cannot accommodate the Destination for results and Schedule execution fields, an additional page is provided. For a complete description of these fields, refer to Chapter 1, Introduction.

Access Level: Data Technician, Manager, System Administrator

Abbreviation: dspo

Alternate: dsportop

Restrictions: None

Routine:Yes

Schedule:Yes

Related Commands: Change Options (cho)

Change Port Options (chpo)

Change Port Speed(s) (chpsp)

Display Port Speed(s) (dspsp)

Display Port Options Input Form

This input form contains the following field:

Device(s) (Required field)

Enter the device(s) whose port options are to be displayed. One or more devices may be specified. Standard addressing format applies to the input. For information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management System User's/System Administrator's Guide.

Display Port Options Results Form

Port options vary according to the device selected. The sample results forms shown in Figures 2-41 and 2-42 illustrate the first two pages of port options for a 3400/4400 Series 19.2 kbps modem.

2-136

January 1997

6800-A2-GB31-20

Page 159
Image 159
Paradyne 6800 manual Display Port Options dspo, Display Port Options Input Form, Display Port Options Results Form