Answering machine settings
30 (ECO710 ONLY)
•If the remote access code is correct, a confirmation beep can be heard, and then you need to press the 2 key, within 8 seconds, to start playing any messages.
The remote feature lets you perform the following functions:
To Press this button |
|
Review message | 1 |
Play back messages | 2 |
Stop message playback | 8 |
Erase message (during message playback) | 6 |
Skip message | 3 |
Turn on answerer machine | 7 |
Turn off answerer machine | 9 |
•If the answering machine is off, and the master PIN has been changed from its default 0000, it will answer the call after 10 rings. Dial the master PIN code within 8 seconds and you will hear a beep to confirm you have entered to remote access mode, as above.
Set the OGM voice language (optional)
1.Press the MENU key to enter menu selection.
2.Press the Navigation key to select ANSW MACHINE and then press OK key to select.
3.Press the N a v i g a t i o n k e y to sel e ct SETTINGS and then press OK key to select.
4.Pre ss the N a v i g a t i o n ke y to s e lec t LANGUAGE and then press OK key to select.
5.Press the Navigation key to select your preferred language and then press OK key to confirm.
6.A confirmation beep is played. Press END key to go back to standby mode.
Call screening
Call screening allows you to hear the caller while he is leaving a message.
You can then decide if you want to talk to the caller directly.
To adjust the speaker’s volume during call screening, press + and - keys on the base station. The lowest volume level turns call screening off.
Default settings
These are the answering machine settings after the unit has been reset.
Answering Machine - ON
Answer mode – ANSW.&RECORD mode
Number of rings before answer – 5 Outgoing messages
–Predefined OGM. (Personalized OGMs deleted) Remote access – Deactivate
Base speaker – Level 5
