26 Advanced use of your telephone
Advanced use of your telephone
Change Master PIN
The Master PIN is used for
Note: If you forget your PIN code, you can reset it to its default 0000 using a handset Reset.
1.Press MENU key to enter menu selection.
2.Press the Navigation key to select ADVANCED SET and then press OK key to select.
3.Press the Navigation key to select CHANGE PIN and then press OK key to select.
4.Enter the current Master PIN when prompted and then press OK key to confirm. As you enter the PIN it will be shown as asterisks (*) on the screen.
5.Enter the new PIN and then press OK key to confirm. A confirmation beep is played.
Register your handset
IMPORTANT: When you purchase a telephone, all handsets are already registered to the base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset has become faulty.
They may be different if you want to register another handset model, in which case you should refer to its user guide.
Additional handsets must be registered to the base unit before you can use them. Up to 4 handsets can be registered to one base station.
The Master PIN is required before you can register or
By default, the Master PIN is 0000.
On the base station, press and hold the HANDSET LOCATOR key for approximately 5 seconds.
1.On the handset, press MENU key to enter menu selection.
2.Press the Navigation key to select ADVANCED
SET and then press OK key to select.
3.Press the Navigation key to s e lec t REGISTRATION and then press OK key to select.
•If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat the first step. (Enter the Master PIN when prompted and then press OK key to confirm. (The default master PIN is 0000)
