Adjust the earpiece volume, Mute/unmute microphone | Oricom ECO71

Your Telephone Operations 13

Answer and end a call

1.When the phone rings, press TALK key.

2.To end a conversation, press END button.

WARNING:

!When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.

IMPORTANT NOTE: You can simply place the handset back on its base station or charger pod to end the call.

Make sure that you have not deactivated the auto hang-up feature.

Adjust the earpiece volume

During a call, press the Navigation key to select from VOLUME 1 to VOLUME 3.

Mute/unmute microphone

When the microphone is muted, the handset displays MUTE ON, and your caller cannot hear you.

During a call, press the MUTE key to turn on/off the

microphone.

Paging

The paging feature enables you to locate a missing

handset if the handset is in range and contains

charged batteries.

Press HANDSET LOCATOR key located at the back of the base station. All the registered handsets start

to ring.

Once retrieved, press any key on the handset or the HANDSET LOCATOR key again to end the paging.

Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed on your phone if you have subscribed to Caller ID. Please contact your network provider for more information on this service.

Handset Tone

Set the ring volume

There are 5 ringer volume options (OFF, LEVEL 1, LEVEL 2, LEVEL 3 and LEVEL 4). The default level is LEVEL 2.

Image 15

Oricom ECO710 warranty Adjust the earpiece volume, Mute/unmute microphone, Paging, Call waiting, Handset Tone

Contents

Oricom Dect Digital Cordless Telephone Table of Contents Safety Information PBX, damage may result to the PBX Getting started Getting Started Tip If you have a Broadband line Purchasing additional handsets Interference Setting the time and date on the handsetRadio signals between handset and base unit Charging the batteries Phone Function Keys Phone Function KeysHandset Microphone Answering machine operation eco710 only What the icons mean? What the icons mean? Your Telephone Operations Your Telephone Operations Make and answer calls Change the display language Call waiting Adjust the earpiece volumeMute/unmute microphone Paging Set date/time format Activate/deactivate auto hang-up Set time format Set alarm Set alarm tone Store a contact in the phonebook Using your phonebookUsing your phonebook Access phonebook Delete all entries from the phonebook list Direct access memoryEdit a phonebook entry Delete a phonebook entry Delete direct access memory Add/edit direct access memory Using the redial list Using the redial list Delete a Call Log entry Using the call logUsing the call log Access call log Turn the answering machine on or off Set the answer modeAnswering machine operation By handset ECO710 only Answering machine operation by handset eco710 only Record a personalized outgoing message Playback and delete messagesPlayback recorded messages Transfer an external call to another handset Using the intercomUsing the intercom Intercom another handset Establish a three-party conference call Switch between an internal and external call Register your handset Advanced use of your telephoneAdvanced use of your telephone Change Master PIN Set prefix Un-register your handset Reset unit Change recall timeSet first ring To activate/deactivate remote control access Answering machine settings ECO710 onlyAnswering machine settings eco710 only Set ring delay Set the OGM voice language optional Answering machine settings 30 ECO710 onlyRemote feature lets you perform the following functions Default settings Everyday use TroubleshootingTroubleshooting Always check first that HandsetTroubleshootingTone Intercom and transferBatteries TroubleshHandsetootiT nge Warranty Warranty Customer Support Customer SupportPage Australia