Your Telephone Operations 11

Your Telephone Operations

Switching on/off

Press and hold the END button for more than 2 seconds to switch on/off the handset in standby mode.

You can switch the handset off and save battery charge.

Note:

When the handset is OFF, it cannot be used for making calls including emergency calls. There will be no ringing during an incoming call. To answer a call, you will need to switch it back on. It may take some time for the handset to re-establish a radio link with the base unit.

To lock/unlock the keypad

Press and hold the key for 1 second to lock/unlock the keypad in standby mode.

Note:

Incoming calls can still be answered even if the keypad was locked.

Set time and date

Note:

If you subscribe to the Caller Display service, the time and date will be set automatically when you receive a call, but you may still need to set the correct year.

1.Press MENU key to enter menu selection.

2.Press the N a v i g a t i o n k e y to sel e ct CLOCK&ALARM and then press OK key to select.

3.Press OK key to select DATE/TIME. The last stored date is displayed. Enter the current date (YY-MM-DD), press OK, then enter the time (HH-MM).

4.Press the Navigation key to select AM or PM (if the time is in 12 HOURS format) and then press OK key to confirm. A confirmation beep is played.

Change your handset’s name

1.Press MENU key to enter menu selection.

2.Press the N a v i g a t i o n k e y to sel e ct PERSONAL SET and then press OK key to select.

3.Press the Navigation key to select HANDSET NAME and then press OK key to select. The current handset name is displayed.

Page 13
Image 13
Oricom ECO710 warranty Your Telephone Operations