AMX Mio R-3 quick start Installing Your Custom Buttons, Touch And Tilt Sensor

Quick Start Guide

Mio R-3Remote Control Device

Overview

The Mio R-3 remote (FG148-03) provides custom control features, contained in an elegant handheld rechargeable device. The Mio R-3 communicates with a NetLinx master via a wireless ZigBee® network.

You need VisualArchitect and KeypadBuilder to properly program this device. The application and documentation are available from www.amx.com.

Mio R-3 (FG148-03) Specifications (Cont.)

Supported	• English	• Korean
Languages	• French	• Simplified Chinese
	• German	• Portuguese
	• Greek	• Russian
	• Italian	• Spanish
	• Japanese	• Other languages supported by Glyphs

11

2	3	4
5	6	7
8		9
104		5 11

12

6

138 1014 915

162 7 317

18

19 15 21

11 20 13

16

22

23 12 1424

2526

26 28

				Power
				Transmission Mode
				Current Menu
				Battery Meter
				Custom Macro Buttons
				Custom Mode Options
1	- Power	14	- Select
2	- Record	15	- Move Right
3	- Pause	16	- Guide
4	- Stop	17	- Exit
5	- Rewind	18	- Move Down
6	- Play	19	- Volume Up
7	- Fast Forward	20	- Last Selected
8	- Skip Back	21	- Channel Up
9	- Skip Forward	22	- Mute
10 - Menu		23	- Volume Down
11 - Info		24	- Channel Down
12 - Move Up		25	- Input
13 - Move Left		26	- Enter

Numeral Keypad

Weight	• .45 lbs (20 g) without batteries
	• .55 lbs (25 g) with batteries
Certifications	• FCC ID: CWU-ZMO
	• CE
	• IEC-60950
	• TELEC
Operating	• Operating Temperature: 0° to 40° C (32° to 104° F)
Environment	• Storage Temperature: -20° to 70° C (-4° to 158° F)
	• Relative Humidity: 5% to 85%
Included Items	• Mio-RBP Rechargeable Lithium-ion Battery (FG147-10)
Other AMX	• DB-9 extension cable (FG10-727)
Equipment	• Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817)
	• Custom engraving (FG147-01)
	• Mio-RCC Kit (FG147-03K)
	• Mio-RCC Charging Base (FG147-02)
	• NXR-ZGW(FG5791-01)
	• NXR-ZRP(FG5791-02)

Installing Your Custom Buttons

1.Flip and turn the Mio R-3 device so that the buttons are facing away from you and the device is upside down.

2.Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free. The battery door will slide in the direction of the bottom end of the device.

3.Unscrew the 6 screw points indicated in FIG. 2.

6 Screw Points

FIG. 1 The Mio R-3 Device

Touch And Tilt Sensor

The Mio R-3 wakes up upon touching either the chrome side rails or pressing a button. When the remote times out while holding it, you can reawaken the device by tilting it. Errant jostling such as a bumped table will not wake the device unless you are holding it.

Specifications

The Mio R-3 device specifications are as follows:

Mio R-3 (FG148-03) Specifications

Battery	Rechargeable Lithium-Ion
Transmission	• Zigbee RF wireless network
Frequencies	• IR 38 Khz
	• IR 455 Khz
Transmission	• ZigBee: 100 feet (30.48m)
Range	• IR 38 Khz: 100 feet (30.48m)
	• IR 455 Khz: 50 feet (15.24m)
Top Components	• LED - blue backlit buttons indicate device is awake
	• Display (OLED) - 128 x 32 pixels, active area is 29.42mm x
	7.98mm
	• Pushbuttons - the power button is red backlit; the rest are blue
	backlit buttons. 45 buttons; 9 custom buttons (3 macro and 6
	device).
Rear Component	• Programming Port - 2.5 mm stereo female conductor jack
	• Battery Door
	• Rechargeable Battery Connection
Dimensions	9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)
(HWD)

Programming Jack

FIG. 2 Internal Mio R-3 Components

4.Turn the unit over so the buttons are facing you.

5.Lift the top assembly away from the PCB.

6.If necessary, push out the standard buttons from the front of the top assem- bly.

7.Drop on your custom button pad and verify the alignment with the guide posts on the PCB.

8.Place the top assembly back down on the PCB and return the unit over, exposing the 6 screw points.

9.Tighten the 6 screw points.

10.Place the battery door back on the device, and slide the door upwards to lock it in place.