Kenmore 110.9586 Heavy Duty, Bulky/Bedding, Normal, Delicate, Express DRY TM, Timed DRY, Low

Auto Dry Preset Cycle Settings
Auto	Dry Cycles			Temperature	Time*
Load	Type				(Minutes)
HEAVY DUTY				High	44
Heavyweight,			towels
BULKY/BEDDING				Medium	64
Jackets, comforters,
pillows
JEANS				Medium	54
Denim jeans,			jackets	High
NORMAL				Medium	41
Corduroys,		work clothes
CASUAL				Low	36
Permanent		press,
synthetics
DELICATE				Extra-Low	22
Lingerie, blouses,
washable		knit fabrics

*Estimated Time with Auto Dry Level (Normal) setting. Time will vary depending on load type and load size.

Use Manual Cycles to select a specific amount of drying time and a drying temperature. When a Manual Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing More Time or Less Time. (See "Changing Cycles, Options and Modifiers.")

Timed Dry

Use this cycle to complete drying if items are still damp after an Auto Dry Cycle. Timed dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting.

EXPRESS DRY TM

Use this cycle for drying small loads or loads that need a short drying time,

Touch Up

Use this cycle to remove wrinkles from items, such as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.

Manual	Preset Cycle		Settings
Manual	Cycles		Temperature	Default Time
Load Type				(Minutes)
TIMED	DRY		High	40
Heavyweight,		bulk,
bedspreads,		work clothes
EXPRESS DRY TM			High	27
Small loads
TOUCH	UP		Medium	20
Remove	wrinkles		High

You can customize your cycles by selecting options.

G

DAMPDRYSIGNAL

gum _ ONN

db

WRINIQ_GUARD

Damp Dry Signal

Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to prevent overdrying or remove partially dry items that may need ironing.

The DAMP DRY SIGNAL is useful when drying bedsheets/linens in a mixed load or large items in the "Bulky/Bedding" cycle. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process.

For the "Bulky/Bedding" cycle, the DAMP DRY signal is preset to ON.

NOTE: The Damp Dry Signal is available only with the Auto Dry Cycles.

WRINKLE GUARD s

WRINKLE GUARD _ prevents wrinkles that form when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period.

•Press WRINKLE GUARD "_to get up to 21/2hours of heat-free, periodic tumbling at the end of a cycle.

•Stop WRINKLE GUARD ® at any time by pressing WRINKLE GUARD "_or opening the dryer door.

For the Casual Auto Dry Cycle, WRINKLE GUARD ® is preset to ON. The other Auto Dry Cycles will retain the WRINKLE GUARD ® setting. For example, if you select WRINKLE GUARD ® in the Normal cycle, WRINKLE GUARD ® will be on the next time you select the Normal cycle.

NOTE: If you do not select WRINKLE GUARD ® , the dryer stops after cool down.

Use Modifiers to select temperatures for the Manual Cycles.

Press Temperature until the desired temperature setting glows. Temperature modifiers cannot be used with the Auto Dry Cycles.

•HIDH

•MEDIUMHI6H

•MEDIUM

•LOW

•EX'mALOW

•AIR DRY

_MPERA'PJRE

eAANL_Lc/r_LE5OffLy]

18