Kenmore 110.9587, 110.9586 manual Control Locked light glows when this option is enabled, Jeans

Models: 110.9587 110.9586

1 48
Download 48 pages 50.7 Kb
Page 17
Image 17

Follow the progress of your dryer with the drying Status indicator lights.

WEt

DAMP

COOLDOWN

CLOTHESDRY

WRINKLEGUARD

CHECKLINTSCREEN•

CON]_OL LOCKED

Wet

The Wet light glows at the beginning of Auto Dry or Manual cycles if a wet item is detected.

In an Auto Dry Cycle, if a wet item is not detected after

5 minutes, the dryer goes directly into Cool Down and the

Cool Down and WRINKLE GUARD ® indicators glow, if selected.

In a Manual Cycle, if a wet item is not detected, the dryer will continue to run for the length of time selected, but the Wet light will not glow.

Damp

The Damp light glows in an Auto Dry Cycle when the laundry is approximately 80% dry. Damp Dry Signal beeps, if selected. See "Options."

Cool Down

The Cool Down light glows during the cool down par[ of the cycle. Laundry cools for ease in handling.

Clothes Dry

The Clothes Dry light glows when the drying cycle is finished. This indicator stays on during WRINKLE GUARD ®.

WRINKLE GUARD s

The WRINKLE GUARD _ light glows when this option is selected. This indicator stays on with Clothes Dry.

Check Lint Screen

The Check Lint Screen light reminds you to check the lint screen. The light glows when the user selects a cycle. It goes out when the door is opened, Start is pressed, or after 5 minutes elapses.

Control Locked

The Control Locked light glows when this option is enabled,

Indicator lights

Other indicator lights show Cycle, Options, Modifiers and End of Cycle settings selected. The display shows the estimated or actual time remaining.

Select the drying cycle that matches the type of load you are drying. (See Auto Dry or Manual Preset Cycle Settings charts.)

CASUALOEUCATEMANUAL

TIMEB OPg(

EXPRESSDRY

JEANS

NORMAL

_

_-OUCH UP

BULKYI BEODIN

HEAW OU'W

Auto Dry Cycles allow you to match the cycle to the load you are drying. See the following "Auto Dry Preset Cycle Settings" chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying.

Heavy Duty

Use this cycle to get high heat for heavy fabrics such as cotton towels or bedspreads.

Bulky/Bedding

Use this cycle to get medium heat for drying large items that require long drying times, such as jackets, comforters and pillows. Rearrange the load when the Damp Dry Signal sounds. This will aid in the drying process. The Damp Dry Signal is preset to ON. See "Options."

Jeans

Usethis cycle to get medium high heat for drying denims.

Normal

Use this cycle to get medium high heat for drying sturdy fabrics such as work clothes.

Casual

Use this cycle to get low heat for drying no-iron fabrics, such as

sport shirts, casual business clothes and permanent press blends.

Delicate

Use this cycle to get extra-low heat to gently dry items such as

lingerie, blouses, or washable knit fabrics.

17

Page 17
Image 17
Kenmore 110.9587, 110.9586 manual Control Locked light glows when this option is enabled, Jeans