Panasonic KX-TS600B, KX-TS600W operating instructions Battery Replacement, Battery Precautions

Disconnect the telephone line cord from the unit.

Press down in the direction of the arrow and open the cover (1).

Battery Replacement

If “” flashes, the battery power is low. Install new batteries as soon as possible. If batteries are not replaced even after the “” is displayed, the unit may not work properly.

•Store the desired items in the Phonebook or Direct Dial memory, because after the battery replacement, the information stored in the Redial List will be cleared.

1

2

3 Replace the batteries with new ones using correct polarity (+, –) (2), and close the cover.

4 Connect the telephone line cord to the unit.

•The time will be shown as “12:00AM 12/31” or “0:00 12/31” and “” will flash after replacing the batteries, readjust the time and date.

Battery Precautions:

The batteries should be used correctly, otherwise the unit may be damaged by battery leakage.

—Do not mix different types of batteries.

—Do not charge, short-circuit, disassemble, heat or dispose of in fire.

—Remove all the batteries when replacing.

Note:

—If you do not install the batteries or if the battery power is low, the time will be shown as “12:00AM 12/31” or “0:00 12/31” and “” will flash. Readjust the time after the battery replacement.

—Replace all the batteries every six months if using Alkaline batteries, or misoperation may occur. (When you use Manganese batteries, replace all of them every three months.)

—Do not use nickel-cadmium batteries.

44

For assistance, please visit http://www.panasonic.com/phonehelp