Beckett 7505 warranty Product Description, Features & Benefits, Advanced Burner Control

● 7505 PARTS & ACCESSORIES

Advanced Burner Control

Product Description

The Beckett GeniSys™ Advanced Burner Control is a 120 Vac primary safety control for residential and light commercial oil burners used in boiler, furnace, and water heater applications. The GeniSys is used with a suitable cad cell flame sensor to control the oil burner motor, igniter, and optional solenoid valve. It has 24 Vac thermostat terminals (if applicable) compatible with both mechanical and many power stealing thermostats. It can provide interrupted or intermittent duty ignition, and it has a 15-second lockout time.

Features & Benefits

•Thermostat and boiler control compatible

•Customizable pre-time and post-time

•Three status lights for system monitoring and diagnostics

•Welded relay protection with redundant motor relays

•Limited reset and limited recycle

•Sleek, modern design

•Cad cell resistance indicator

•Technician Pump Prime mode

•5-Year Warranty

•Two communication ports for adding alarm contacts, programming display, and/or future wireless communications

Add a GeniSys Display and GeniSys Lockout Alarm

to fully utilize the features of the GeniSys advanced burner control.

The GeniSys Display (Pt. No. 52067) allows a technician to monitor and program the primary control variables. The display shows current burner status, control timings, and burner cycle history. The display’s programming mode allows a technician to customize both the pre-time and post-time settings and a lockout service message.

•32 character backlit alphanumeric display

•Sealed pushbutton keypad

•Low voltage operation

•Continuous real-time cycle monitoring

•Continuous cad cell resistance reading

•Continuous AC line voltage read-out

•Real-time error notification

•Customizable pre-time (valve-on delay) & post-time (motor off delay)

•15 cycle history monitoring

•Five Year Warranty

•Customizable lockout service message

The GeniSys Lockout Alarm (Pt. No. 52040) functions as the interface between the primary control and an existing alarm panel or any alarm mechanism requiring contact closure in the event of a soft or hard lockout of the GeniSys Control.

To learn more, see www.beckettcorp.com or ask for literature pt. nos. 61669 & 61687