Motorola WS5100 manual 4.9.2Viewing Unadopted Access Ports, Click the Adopted AP tab

Network Setup 4-93

2. Click the Adopted AP tab.

3. Refer to the Adopted AP screen for the following information:

MAC Address	Displays the radio's first MAC address when it is adopted by the switch.
Model	Displays s the Model Number of the access port.
Serial	Displays the serial number of the access port, and is used for management purposes by the
	switch. It is read-only and cannot be modified.
HW Version	Displays the Hardware Version of the access port. This information can be helpful when
	troubleshooting problems with the access port.
IP Address	Displays the IP address of the adopted access port.
Bootloader	The Bootloader value displays the software version the access port boots from. This
	information can be helpful when troubleshooting problems.
WISP Version	Displays the version of the interface protocol between the access port and the switch. This
	information can be helpful when troubleshooting problems with the access port.
Fw Version	Displays the firmware version on the access port at run time. Use this information to assess
	whether the software requires an upgrade for better compatibility with the Switch.
Radio Indices	Displays the indices of the radios belonging to the selected access port. These indices are
	equivalent to a numerical device recognition identifier (index) for the radio.

4.Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).

4.9.2Viewing Unadopted Access Ports

Use the Unadopted AP tab for gathering device hardware address and software version information for the access port.

To view existing Radio Configuration information: