4-8WS5100 Series Switch System Reference Guide

6.Click OK to use the changes to the running configuration and close the dialog.

7.Click Cancel to close the dialog without committing updates to the running configuration.

4.2.3Viewing Address Resolution

The Address Resolution table displays the mapping of layer three (IP) addresses to layer two (MAC) addresses. To view the details of the tab:

1.Select Network > Internet Protocol from the main tree menu.

2.Select the Address Resolution tab.

3. Refer to the Address Resolution table for the following information:

Interface

Displays the name of the actual interface on which the IP address was found

 

(typically a VLAN).

IP Address

Displays the IP address being resolved.

MAC Address

Displays the MAC address that correspond to the IP address being resolved.

Type

Defines whether the entry was added statically or created dynamically due to network

 

traffic. Entries are typically static.

4. Click the Clear button to remove the selected AP entry if no longer usable.

Page 82
Image 82
Motorola WS5100 manual Viewing Address Resolution, Select the Address Resolution tab, Typically a Vlan, Type