BenQ How to Reset the Lamp Timer on Your Projector

7.Tighten the screws that secure the lamp.

• Loose screw may cause a bad connection, which could result in malfunction.

• Do not over tighten the screws.

8.Ensure the handle is fully laid flat and

locked in place.

9.Replace the lamp cover by sliding it into place.

(a)(b)

10.Tighten the screw that secures the lamp cover.

•Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screw.

11.Restart the projector.

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

12.After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP > Lamp Settings menu. Press MODE/ ENTER. The Lamp Settings page displays.

Press to highlight Reset Lamp Timer and press MODE/ENTER. A warning message

displays asking if you want to reset the lamp timer. Highlight Reset and press MODE/ ENTER. The lamp time will be reset to '0'.

Do not reset if the lamp is not new or replaced as this could cause damage.

54 Maintenance