3Press the numeric buttons (1 – 10, +10) to select a channel number while the channel number position is flashing.
•For channel number 5, press 5.
•For channel number 15, press +10, then 5.
•For channel number 30, press +10, +10, then 10.
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | ||||||
LPCM | L | C | R |
| PL | ATT | ||
DOLBY D | S . WFR LFE | NEO : 6 | HP | |||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | ||||||
96 / 24 | AUTO SR | kHz | ||||||
|
|
|
|
|
|
|
| |
4Press MEMORY again while the selected channel number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the previously stored one.
To tune in a preset station
From the remote control:
1Press FM/AM to select the band.
The last received station of the selected band is tuned in and the numeric buttons now work for tuner operations.
•Each time you press the button, the band alternates between “FM” and “AM.”
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | ||||||
LPCM | L | C | R |
| PL | ATT | ||
DOLBY D | S . WFR LFE | NEO : 6 | HP | |||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | ||||||
96 / 24 | AUTO SR | kHz | ||||||
|
|
|
|
|
|
|
| |
2Press the numeric buttons (1 – 10, +10) to select a preset channel number.
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | ||||||
LPCM | L | C | R |
| PL | ATT | ||
DOLBY D | S . WFR LFE | NEO : 6 | HP | |||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | ||||||
96 / 24 | AUTO SR | kHz | ||||||
|
|
|
|
|
|
|
| |
•For channel number 5, press 5.
•For channel number 15, press +10, then 5.
•For channel number 30, press +10, +10, then 10.
On the front panel:
2 1, 3
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
1Turn SOURCE SELECTOR to select “FM” or “AM.”
The last received station of the selected band is tuned in.
2Press TUNER PRESET.
“P” appears on the display and MULTI JOG now works for selecting preset channels.
3Turn MULTI JOG to select a preset channel number while “P” appears on the display.
•To increase the preset channel numbers, turn MULTI JOG clockwise.
•To decreases the preset channel numbers, turn MULTI JOG counterclockwise.
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | ||||||
LPCM | L | C | R |
| PL | ATT | ||
DOLBY D | S . WFR LFE | NEO : 6 | HP | |||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | ||||||
96 / 24 | AUTO SR | kHz | ||||||
|
|
|
|
|
|
|
| |
Selecting the FM reception mode
When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.
•You can store the FM reception mode for each preset station (see page 32).
From the remote control ONLY:
While listening to an FM station, press FM MODE.
•Each time you press the button, the FM reception mode alternates between “AUTO MUTING” and “MONO.”
AUTO MUTING | Normally select this. |
| When a program is broadcast in stereo, |
| you will hear stereo sound; when in |
| monaural, you will hear monaural sound. |
| This mode is also useful to suppress |
| static noise between stations. The AUTO |
| MUTING indicator lights up on the display. |
|
|
MONO | Select this to improve the reception (but |
| stereo effect will be lost). |
| In this mode, you will hear noise while |
| tuning in to the stations. The AUTO |
| MUTING indicator goes off from the |
| display. (The ST indicator also goes off.) |
|
|
Initial setting: AUTO MUTING
English
33
