JVC RX-F31S Connecting video components, Ç Î ‰ Ï Ì, Ï Only for DVD recorder: To S-videoinput

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

This receiver is equipped with the following video terminals— composite video, S-video, and component video terminals.

•If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an S- video cable (not supplied) or component video cable (not supplied). By using these terminals, you can get a better picture quality in the order:

Component > S-video > Composite

Turn off all components before making connections.

•When you connect other components, refer also to their manuals.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

IMPORTANT:

Component video signals are transmitted only through component video output jacks. Therefore, if a recording video component and a playing video component are connected to the receiver through the video terminals of different type, you cannot record the picture. In addition, if the TV and a playing video component are connected to the receiver through the video terminals of different type, you cannot view the playback picture on the TV.

On the other hand, S-video signals and composite video signals can be converted into each other and transmitted through the corresponding output jack. For details about the settings of the conversion, see page 25.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

If your video components have AV COMPU LINK terminal

See also page 40 for detailed information about the connection and the AV COMPU LINK remote control system.

7Connecting a DVD recorder or DVD player with its stereo output jacks (DVR/DVD):

AUDIO
DVR	DVR/DVD	OUT	VCR
OUT (REC)	IN (PLAY)	(REC)

Red

White

Stereo audio cable (not supplied)

White

Red

220V 110V

230 -

240V 127V

Å	ı	DVD recorder or
		DVD player

Y	PB	PR	VIDEO
VCR
IN
DVR/DVD
IN
MONITOR			S-VIDEO DVR	DVR/DVD
OUT			OUT (REC)	IN (PLAY)
	COMPONENT

Green Blue Red

Ç Î ‰ Ï Ì

Composite video cable (not supplied)

OUT VCR (REC)

S-video cable (not supplied)

Component video cable (not supplied)

NOTES

•When connecting a DVD recorder or DVD player to the component video input jacks, make the component video input setting (DVD VIDEO INPUT) correctly. If you do not, you cannot view the playback picture on the TV or the AV COMPU LINK remote control system cannot operate properly. For details, see page 25.

•You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the audio input mode for a DVD recorder and DVD player is set to use the digital coaxial terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital connection, see page 11.

ÅTo left/right audio channel output

ıOnly for DVD recorder: To left/right audio channel

input

ÇOnly for DVD recorder: To composite video input Î To composite video output

‰ To S-video output

Ï Only for DVD recorder: To S-video input

Ì To component video output

•Connect Y, PB, and PR correctly.

7