After setting the mode selector correctly, you can perform the
following operations on the DVD recorder or DVD player.
See the instructions supplied with the DVD recorder or DVD player for details.
7Changing the remote control code for DVD recorder
Some JVC DVD recorders can accept four types of the control signals. You can assign one of the four codes to the remote control supplied with this receiver for operating your DVD recorder. For details, refer to the manual supplied with the DVD recorder.
Initial setting: 03
1Set the mode selector to “DVR.”
2Press and hold DVR/DVD 
.
3Press DVR/DVD.
4Enter the remote control code you want using buttons 1 – 4, and 0.
EX.: To enter the code “2”, press 0, then 2.
Code for DVR | Number to enter |
1 | 01 |
2 | 02 |
3 | 03 |
4 | 04 |
5Release DVR/DVD 
.
Now, the remote control code has been changed.
You can always perform the following operation:
DVR/DVD | : Turn on or off the DVD recorder or DVD player. |
3: | Start playback. |
|
|
7: | Stop playback. |
|
|
8: | Pause playback. To release it, press 3. |
|
|
¢: | Skip to the beginning of the next chapter. |
|
|
4: | Return to the beginning of the current (or |
| previous) chapter. |
|
|
¡: | |
|
|
1: | |
|
|
TOP MENU/MENU:
Display the menu recorded on discs.
ON SCREEN: Shows the
5/∞/3/2: Select an item on the menu screen.
ENTER: Enter the selected item, channel number, chapter/title number, or track number (if required).
You can also use the following buttons to operate JVC DVD recorder and/or DVD player if it supports the corresponding function:
For various settings:
AUDIO: Select the audio language/channel.
SUBTITLE: Select the subtitle language.
SET UP: Display the Preference display.
VFP:Show the picture adjustment screen.
PROGRESSIVE*: Change the scanning mode.
ANGLE: Select the view angle.
For various playback:
(one touch replay):
Move the playback position back 10 seconds before the current position.
RETURN: Return to the main menu during menu operation.
CANCEL: Cancel the programmed track, etc.
Only for DVD recorder operations:
CHANNEL
DVD/HDD: Select the DVD recorder or HDD deck. (Only for a DVD recorder incorporated with HDD deck.)
(skip): Move the playback position ahead 30 seconds after the current position.
1 – 9, 0: Select a channel number (while stopped) or a chapter/title number, track number (while playing back). Press ENTER to enter the number.
REC MODE: Select the recording mode.
REC PAUSE: Enter recording pause. To start recording, press 3.
DISPLAY: Change the display information.
Only for DVD player operations:
fs/Rate*: Show the sampling frequency.
TITLE/GROUP: Make the numeric buttons work for selecting the title/group number.
ZOOM: | Zoom in and out. |
1 – 10, 0, +10: Select a chapter/title number, track number, menu item, etc.
DVD/CARD: Select the disc or memory card to play. (Only for a DVD player incorporated with memory card slots.)
DIMMER: Change the display brightness.
THUMBNAIL: Show the thumbnail screen for JPEG discs.
SLIDE: Start the slide show playback for JPEG discs.
3D/S.EFFECT: Apply the 3D effect.
PAGE: Show browsable still pictures on DVD Audio discs.
* Press and hold when using these buttons.
If these buttons do not function normally, use the remote control supplied with your DVD recorder or DVD player. Refer also to the manuals supplied with the DVD recorder or DVD player for details.
43
