Connecting the FM and AM antennas
Do not connect the AC power plug to the wall outlet until all connections are completed.
English
AM loop antenna (supplied)
If AM reception is poor, connect an outdoor single
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
If FM reception is poor, connect an outdoor FM antenna (not supplied).
AM LOOP | ANTENNA |
| |
| FM 75 |
AM EXT | COAXIAL |
FM antenna (supplied)
220V 
110V
230 -
240V 127V
AM antenna connection | NOTES |
|
Connect the AM loop antenna supplied to the AM LOOP | • If the AM loop antenna wire is covered with vinyl, | |
terminals. | remove the vinyl while twisting it as shown on the | |
Connect the white cord to the AM EXT terminal, and connect the | right. | |
black cord to the H terminal. | • Make sure the antenna conductors do not touch | |
Turn the loop until you have the best reception. | any other terminals, connecting cords and power | |
• If the reception is poor, connect an outdoor single | cord. This could cause poor reception. | |
wire (not supplied) to the AM EXT terminal. Keep the AM loop |
|
|
antenna connected. |
|
|
FM antenna connection |
|
|
Connect the FM antenna supplied to the FM 75 Ω COAXIAL |
|
|
terminal as a temporary measure. |
|
|
Extend the supplied FM antenna horizontally. |
|
|
• If the reception is poor, connect an outdoor FM antenna (not |
|
|
supplied). Before attaching a 75 Ω coaxial cable with a |
|
|
connector (IEC or DIN 45325) , disconnect the supplied FM |
|
|
antenna. |
|
|
5
