English
❏Changing the transmittable signals for operating a DBS tuner
Set the mode selector to “AUDIO/TV/VCR/DBS.”
1Press and hold DBS 
.
2Press DBS.
3Enter the manufacturer’s code using buttons 1 – 9, and 0.
See “Manufacturers’ codes for DBS tuner” below.
❏Changing the transmittable signals for operating a DVD player
Set the mode selector to “DVD.”
1Press and hold DVR/DVD 
.
2Press DVR/DVD.
3Enter the manufacturer’s code using buttons 1 – 9, and 0.
See “Manufacturers’ codes for DVD player” below.
4Release DBS 
.
Now, you can perform the following operation on the DBS tuner.
DBS : | Turn on or off the DBS tuner. |
After pressing DBS, you can perform the following operations on the DBS tuner.
CHANNEL
1 – 9, 0:Select the channel numbers on the
DBS tuner.
See the instructions supplied with the DBS tuner for details.
5Try to operate your DBS tuner by pressing DBS 
.
When your DBS tuner turns on or off, you have entered the
correct code.
If more than one code is listed for your brand of DBS tuner,
try each one until the correct one is entered.
Manufacturers’ codes for DBS tuner
Manufacturer | Codes |
|
|
Echostar | 40 |
G.I. | 01, 41 |
Gemini | 02 |
Hamlin | 03, 04, 05, 06 |
Hitachi | 42 |
Hughes | 43 |
Jerrold | 07, 08, 09, 10, 11, 12, 13, |
| 14, 15 |
Macom | 16, 17, 18 |
Magnavox | 19 |
Oak | 20, 21, 22 |
Panasonic | 23, 24, 44 |
Philips | 25, 26, 27, 28, 29, 30 |
Pioneer | 31, 32 |
Primestar | 45 |
RCA | 46 |
S. Atlanta | 33, 34, 35 |
Samsung | 36 |
Sony | 47 |
Tocom | 37 |
Toshiba | 48 |
Zenith | 38, 39 |
|
|
Initial setting: 01
4Release DVR/DVD 
.
Now, you can perform the following operation on the DVD player.
DVR/DVD : | Turn on or off the DVD player. |
|
|
3: | Start playback. |
|
|
1: | Return to the beginning of the current |
| chapter (or |
|
|
¡: | Skip to the beginning of the next chapter |
| (or |
|
|
7: | Stop playback. |
|
|
8: | Pause playback. |
|
|
MENU: | Display the menu recorded on DVD |
| VIDEO discs. |
|
|
5/∞/3/2: | Select an item on the menu screen. |
|
|
ENTER: | Enter the selected item. |
|
|
1 – 9, 0: | Select the chapter number. |
|
|
See the instructions supplied with the DVD player for details.
5Try to operate your DVD player by pressing DVR/DVD 
.
When your DVD player turns on or off, you have entered the correct code.
If more than one code is listed for your brand of DVD player,
try each one until the correct one is entered.
Manufacturers’ codes for DVD player
Manufacturer | Codes |
|
|
JVC | 01 |
Hitachi | 12 |
Kenwood | 05, 08 |
Mitsubishi | 10 |
Onkyo | 15, 16 |
Panasonic | 04 |
Philips | 07 |
Pioneer | 03 |
Samsung | 14 |
Sony | 02 |
Toshiba | 06 |
Yamaha | 09 |
Initial setting: 01
NOTE
You cannot use this remote control to operate other manufacturers’ DVD recorder.
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
46
