
English
Using the Midnight mode
—MIDNIGHT MODE
You can enjoy a powerful sound at night using the Midnight mode.
•Once you have made an adjustment, it is memorized for each source.
MIDNIGHT MODE: OFF
Select when you want to enjoy surround with its full dynamic range. (No effect applied.)
MIDNIGHT MODE: 1
Select when you want to reduce the dynamic range a little.
MIDNIGHT MODE: 2
Select when you want to apply the compression effect fully (useful at night).
Initial setting: MIDNIGHT MODE: OFF
From the remote control
You can also make adjustments the following way from the remote control.
Set the mode selector to “AUDIO/TV/VCR/DBS.”
Press SOUND, then press MIDNIGHT repeatedly to select either one of the above.
NOTE
After pressing SOUND, the numeric buttons work for sound adjustments. To use the numeric buttons to operate your target source, press the corresponding source selecting button before operation; otherwise, the remote control may not work as you intend.
Setting the digital input (DIGITAL IN)
When you use the digital input terminals, register what components are connected to which
Select one of the following components for each terminal:
DVR/DVD For the DVD player (or DVD recorder).
DBS For the DBS tuner.
VCR For the VCR.
TV | For the TV. |
Initial setting: DVR/DVD (for “DIGITAL IN 1”)
DBS (for “DIGITAL IN 2”)
VCR (for “DIGITAL IN 3”)
NOTES
•You cannot assign the same component for different terminals. The priority order for assignment is as follows:
“DIGITAL IN 1” > “DIGITAL IN 2” > “DIGITAL IN 3.” “DIGITAL IN 1” can be set to any component.
Ex.: When “DIGITAL IN 1” is set to “TV.”
DIGITAL IN 1: TV
“DVR/DVD,” “DBS,” and “VCR” are selectable for “DIGITAL IN 2.”
And when “DIGITAL IN 2” is set to “DVR/DVD.”
DIGITAL IN 1: TV
DIGITAL IN 2: DVR/DVD
“DBS” and “VCR” are selectable for “DIGITAL IN 3.”
•Setting “DIGITAL IN 1” affects “DIGITAL IN 2” and “DIGITAL IN 3” settings. When you have changed “DIGITAL IN 1,” confirm the components assigned to “DIGITAL IN 2” and “DIGITAL IN 3.”
24