JVC RX-F31S manual Superimpose

Selecting the component video input mode—DVD VIDEO INPUT/VCR VIDEO INPUT

When you use the component video inputs for connecting the DVD recorder (or DVD player) or VCR, register the type of video input jacks.

If you have not selected appropriate video input jacks, you cannot view the playback picture on the TV or the AV COMPU LINK remote control system cannot operate properly (see page 40).

For the DVD recorder or DVD player (DVD VIDEO):

DVD VIDEO: S/C

Select when connecting the DVD recorder (or DVD player) to the composite video or S-video input jacks.

DVD VIDEO: COMPONENT

Select when connecting the DVD recorder (or DVD player) to the component video input jacks.

Initial setting: DVD VIDEO: S/C

For the VCR (VCR VIDEO):

VCR VIDEO: S/C

Select when connecting the VCR to the composite video or S- video input jacks.

VCR VIDEO: COMPONENT

Select when connecting the VCR to the component video input jacks.

Initial setting: VCR VIDEO: S/C

Superimposing the menus

—SUPERIMPOSE

You can select whether or not to superimpose the on-screen display on the TV screen.

SUPERIMPOSE: ON

Select to superimpose the on-screen display on the TV screen.

SUPERIMPOSE: OFF

Select to cancel superimposition. The on-screen display will be shown on the blue background screen.

Initial setting: SUPERIMPOSE: ON

NOTES

•Some on-screen displays appear on the TV screen regardless of this setting.

•The on-screen display does not appear on the TV screen when connecting the TV through the COMPONENT MONITOR OUT jacks (see page 10).

Converting S-video signals into composite video signals—DOWN MIX

You can select whether or not to convert S-video signals into composite video signals.

DOWN MIX: ON Select to convert S-video signals into composite video signals.

DOWN MIX: OFF Select not to use this function.

Initial setting: DOWN MIX: OFF

NOTES

•This function is available when satisfying all the following requirements:

–When a video component is connected to this receiver through at least one of the S-video input terminals.

–When a video component or the TV is connected to this receiver through at least one of the composite video output jacks.

–Either the DVD VIDEO INPUT or VCR VIDEO INPUT is set to “S/C” (see left column).

•When using this function, set the input mode of the TV correctly. (Refer also to the manual supplied with the TV.)

Converting composite video signals into S- video signals—Y/C SEPARATE

You can select whether or not to convert composite video signals come from a video component into S-video signals.

Y/C SEPARATE: ON Select to convert composite video signals into S-video signals.

Y/C SEPARATE: OFF Select not to use this function.

Initial setting: Y/C SEPARATE: OFF

NOTES

•This function is available when satisfying all the following requirements:

–When a video component is connected to this receiver through at least one of the composite video input jacks.

–When a video component or the TV is connected to this receiver through at least one of the S-video output terminals.

–Either the DVD VIDEO INPUT or VCR VIDEO INPUT is set to “S/C” (see left column).

•When using this function, set the input mode of the TV correctly. (Refer also to the manual supplied with the TV.)

25