Frymaster H55 operation manual Problem, Probable Causes, Corrective Action, Heating mode light

PROBLEM	PROBABLE CAUSES	CORRECTIVE ACTION
		A. If available, substitute a controller
Heating mode light		known to be working for the
	A. Failed controller.	suspect controller. If the fryer
cycles on and off		functions correctly, order
normally. Blower		replacement from FASC.
not running and		B. If available, substitute a harness
burners will not	B. Damaged controller wiring	known to be good for the suspect
ignite.		harness. If the fryer functions
	harness.	correctly, order replacement
		harness from FASC.
Fryer is slow coming
out of melt cycle.
Heating mode light	Dirty or obstructed combustion air	Clean and adjust per instructions
is ON. Trouble light
	blower.	in Chapter 5 of this manual.
comes on a short
time after coming
out of melt cycle.
Fryer is operating
normally, but	Dirty or obstructed combustion air	Clean and adjust per instructions
recovery is slow	blower.	in Chapter 5 of this manual.
when cooking.
Fryer is operating	A. Obstructed combustion air	A. Clean and adjust per instructions
normally, but	blower.	in Chapter 5 of this manual.
	B. Dirty or obstructed gas valve vent	B. Clean per instructions in Chapter
produces popping
sound when burners	tube (non-CE fryers only).	5 of this manual.
	C. Malfunctioning combustion air	C. If blower is slow to come up to
ignite.
	blower.	speed, contact FASC for service.
Heating mode light
is on and blower is	Blown fuse on interface board or	Replace fuse.
running, but burner	ignition module.
will not ignite.
Heating mode light		A. If available, substitute a controller
		known to be working for the
is cycling on and off	A. Failed controller.	suspect controller. If the fryer
normally and fryer		functions correctly, order
is operating		replacement from FASC.
normally, but		B. If available, substitute a harness
trouble light is on	B. Damaged controller wiring	known to be good for the suspect
continuously (false		harness. If the fryer functions
alarm).	harness.	correctly, order replacement
		harness from FASC.

6-5