QUARTERLY CHECKS AND SERVICE
Clean Combustion Air Blower Assembly
1. Disconnect the blower wiring harness and remove the four blower mounting nuts.
Blower
Wiring connection assembly mounting nuts
2.Remove the three fasteners that secure the blower motor assembly to the blower housing, and separate the two components.
Remove these fasteners.
3.Wrap the motor with plastic wrap to prevent water from entering it. Spray degreaser or detergent on the blower wheel and the blower housing. Allow it to soak for five minutes. Rinse the wheel and housing with hot tap water, then dry with a clean cloth.
Wrap the motor and wires |
with plastic wrap or a |
plastic bag. |
Blower Housing |
Blower Wheel |