HP Enterprise CP5525 manual Access the Preboot menu, 63Preboot menu options 1, Sign

Preboot menu options

If an error occurs while the product is booting, an error message appears on the control-panel display. The user can access the Preboot menus. The Error menu item will not be seen if an error did not occur.

Access the Preboot menu

1.Turn the product on.

2.Press the Stop button when the Ready, Data, and Attention LEDs are illuminated solid.

3.Use the Down arrow button to navigate the Preboot menu options.

4.Press the OK button to select a menu item.

Cold reset using the Preboot menu

1.Turn the product on.

2.Press the Stop button when the Ready, Data, and Attention LEDs are illuminated solid.

3.Use the Down arrow button to highlight Administrator, and then press the OK button.

4.Use the Down arrow button to highlight Startup Options, and then press the OK button.

5.Use the Down arrow button to highlight Cold Reset, and then press the OK button.

6.Press the Back button twice to highlight Continue, and then press the OK button.

NOTE: The product will initialize.

Table 3-63Preboot menu options (1 of 5)

Menu option	First level	Second level	Third level	Description
Continue				Selecting theContinue item exits the Preboot menu and
				continues the normal boot process.
				If a selection is not made in the initial menu within 30 seconds,
				the product returns to a normal boot (the same as selecting
				Continue.
				If the user navigates to another menu, the timeout does not
				apply.
Sign In				Enter the Administrator PIN or Service PIN if one is required to
				access the Preboot menu.

540 Chapter 3 Solve problems ENWW