HP Enterprise CP5525 manual Method, Release and Dhcp Renew, Default IP Auto IP

Table 3-41	Embedded Jetdirect (continued)
First level	Second level	Third level	Fourth level	Fifth level	Values	Description
	IPv4 Settings	Config			Bootp*	Specifies the method that TCP/
		Method			DHCP	IPv4 parameters will be
						configured on the HP Jetdirect
					Auto IP	print server.
					Manual	Use Bootp (Bootstrap Protocol)
						for automatic configuration
						from a BootP server.
						Use DHCP (Dynamic Host
						Configuration Protocol) for
						automatic configuration from a
						DHCPv4 server. If selected and
						a DHCP lease exists, DHCP
						Release and DHCP Renew
						menus are available to set
						DHCP lease options.
						Use Auto IP for automatic
						link-local IPv4 addressing. An
						address in the form
						169.254.x.x is assigned
						automatically.
		Default IP			Auto IP*	Specify the IP address to
					Legacy	default to when the print server
						is unable to obtain an IP
						address from the network
						during a forced TCP/IP
						reconfiguration (for example,
						when manually configured to
						use BootP or DHCP).
						This feature assigns a static IP
						address that might interfere
						with a managed network.
						Auto IP: A link-local IP
						address 169.254.x.x is set.
						Legacy: The address
						192.0.0.192 is set, consistent
						with older HP Jetdirect
						products.
		DHCP			Yes	This menu appears if Config
		Release			No*	Method is set to DHCP and a
						DHCP lease for the print server

exists.

No: The current DHCP lease is saved.

Yes: The current DHCP lease and the leased IP address are released.

392 Chapter 3 Solve problems ENWW