Network Settings menu

In the following table, asterisks (*) indicate the factory default setting.

Table 3-40

Network Settings menu

 

 

 

 

First level

Values

Description

 

 

 

I/O Timeout

Range: 5 – 300 sec

Allows you to set the product I/O Timeout

 

Default = 15

in seconds. The default is 15 seconds.

 

 

 

 

Use this setting to adjust timeout for the best

 

 

performance. If data from other ports

 

 

appears in the middle of your print job,

 

 

increase the timeout value.

 

 

Embedded Jetdirect

See the table that follows for details. These

 

 

menus have the same structure. If an

 

 

additional HP Jetdirect network card is

 

 

installed in the EIO slot, then both menus are

 

 

available.

 

 

 

Table 3-41

Embedded Jetdirect

 

 

 

 

 

 

First level

Second level Third level

Fourth level Fifth level Values

Description

Information

Print Sec

Yes

 

Report

No*

 

 

Yes: Prints a page that contains the current security settings on the HP Jetdirect print server.

No: A security settings page is not printed.

TCP/IP

Enable

On*

On: Enable the TCP/IP

 

 

Off

protocol.

 

 

 

 

 

 

Off: Disable the TCP/IP

 

 

 

protocol.

 

 

 

 

 

Host Name

Use the arrow

An alphanumeric string, up to

 

 

buttons to edit

32 characters, used to identify

 

 

the host name.

the product. This name is listed

 

 

NPIXXXXXX*

on the HP Jetdirect

 

 

configuration page. The default

 

 

 

host name is NPIxxxxxx, where

 

 

 

xxxxxx is the last six digits of

 

 

 

the LAN hardware (MAC)

 

 

 

address.

 

 

 

 

ENWW

Tools for troubleshooting 391

Page 415
Image 415
HP Enterprise CP5525 manual Network Settings menu, First level Values Description Timeout