Toner collection unit access door

1.Open the toner collection unit access door (callout 1), remove the toner collection unit, and then release the link arm (callout 2) on the left side of the door.

Figure 2-35Remove the toner collection unit access door (1 of 3)

2

1

2.Partially close the door so that the right link arm (callout 1) can clear the stop (callout 2) on the door, and then disengage the link arm from the door.

CAUTION: Do not disconnect the right-hand link arm when the door is completely open. Doing so can disconnect the link arm spring.

Figure 2-36Remove the toner collection unit access door (2 of 3)

2

1

ENWW

Removal and replacement procedures 117

Page 141
Image 141
HP Enterprise CP5525 manual Toner collection unit access door, 36Remove the toner collection unit access door 2