6.Disconnect one connector (callout 1), and then release the wire harness from the guide (callout 2).

TIP: It might be easier to disconnect the connector, if you release it from the black-plastic holder.

Figure 2-121Remove the fuser gear assembly (6 of 9)

1

2

1

7.Disconnect two connectors (callout 1), and then release the wire harness from the retainer and guide (callout 2).

Figure 2-122Remove the fuser gear assembly (7 of 9)

1

2

ENWW

Removal and replacement procedures 179

Page 203
Image 203
HP Enterprise CP5525 manual 122Remove the fuser gear assembly 7