HP Enterprise CP5525 manual Manual sensor test, 20Manual sensor diagnostic tests

NOTE: Duplex models only.

●Number of Copies. Set the numbers of copies to be printed; the choices are 1,10, 50, 100, or 500.

1.Press the Home button.

2.Open the following menus:

●Administration

●Troubleshooting

●Diagnostic Tests

3.Press the Down arrow to highlight PAPER PATH TEST, and then press the OK button.

4.Select the paper-path test options for the test you want to run.

Manual sensor test

Use this diagnostic test to manually test the product sensors and switches. Each sensor is represented by a letter and number on the control panel display.

1.Press the Home button .

2.Open the following menus:

●Administration

●Troubleshooting

●Diagnostic Tests

3.Press the Down arrow to highlight the Manual Sensor Test item, and then press the OK button.

To exit this diagnostic, press the Stop button , and then select EXIT TROUBLESHOOTING.

Menus cannot be opened during this test, so the OK button serves the same function as the Stop button .

Table 3-20Manual sensor diagnostic tests

	Sensor or switch name	Sensor or switch number
	Front door opening/closing switch	PS14
	Right door opening/closing sensor	PS15
	A TOP (top of page) sensor	PS5
	Fuser loop 1 sensor	PS7
	Fuser loop 2 sensor	PS8
	Fuser pressure-release sensor	PS9
	Fuser output sensor	PS6
ENWW		Tools for troubleshooting	289