HP Enterprise CP5525 manual 67Preboot menu options 5

Table 3-67Preboot menu options (5 of 5)

	Menu option	First level	Second	Third level	Description
			level
	Administrator	Startup			Select the Startup Options item to specify options that
	continued	Options			can be set for the next time the product is turned on and
					initializes to the to Ready state.
			Cold Reset		Check the Cold Reset item to clear the IP address and
					all customer settings (this item also returns all settings to
					factory defaults).
					NOTE: Items in the Service menu are not reset.
			First Power		Not currently functional: This item allows the product
					initialize as if it is the first time it has been turned on.
					For example, the user is prompted to configure first time
					settings like Select Date/Time, Select Language, and
					other settings).
					Check this item so that it is enabled for the next time the
					product power is turned on.
					When the product power is turned on the next time, this
					item is unchecked so that the pre-configured settings are
					used during configuration and the first time setting
					prompt is not used.
			Skip Plug-		This item allows the device to be started without loading
			ins		the third party applications.
					This means that files including Accessible Architecture on
					the disk will not be available at bootup. This is useful for
					troubleshooting problems with the hard disk without
					having to remove the hard disk. It also applies to flash
					file system disks on DIMMs.
					In this case, this function will cause the printer to
					configure the HP firmware first, followed by the third-
					party applications.
					NOTE: The files on the disk will be available after the
					printer enters the Ready state.
			Skip Cal		Select the Skip Cal item to initialize the product the next
					time the power is turned on without calibrating.
			Show		Not currently functional: Check the Show Revision
			Revision		item to allow the product to initialize and show the
					firmware version when the device reaches the Ready
					state.
					Once the product power is turned on the next time, the
					Show Revision item is unchecked so the firmware
					revision is not shown.
			Lock Service		CAUTION: Select the Lock Service item to lock the
					Service menu access (both PreBoot and Device
					Maintenance application).
					Service personnel must have the Administrator remove
					the Lock Service setting before they can enter the
					Service menu.
ENWW					Preboot menu options	545