Product pulls from incorrect tray | HP Enterprise CP5525 instruction

Product pulls from incorrect tray

Product pulls from incorrect tray

Cause	Solution

You are using a driver for a different product.	Use a driver for this product.

The specified tray is empty.	Load paper in the specified tray.

The paper size is not configured correctly for the input tray.	Print a configuration page or use the control panel to
	determine the paper size for which the tray is configured.

The guides in the tray are not against the paper.	Verify that the guides are touching the paper.

Paper does not feed automatically

Paper does not feed automatically

Cause	Solution

Manual feed is selected in the software program.	Load Tray 1 with paper, or, if the paper is loaded, press the
	OK button.

The correct size paper is not loaded.	Load the correct size paper.

The input tray is empty.	Load paper into the input tray.

Paper from a previous jam has not been completely removed.	Open the product and remove any paper in the paper path.

The paper size is not configured correctly for the input tray.	Print a configuration page or use the control panel to
	determine the paper size for which the tray is configured.

The guides in the tray are not against the paper.	Verify that the rear and width paper guides are touching the
	paper.

The Manually Feed Prompt item is set to Always. The product always prompts for manual feed, even if the tray is loaded.

Open the tray, reload the media, and then close the tray.

Or, change the Manually Feed Prompt setting to Unless loaded, so that the product prompts for manual feed only when the tray is empty.

The Use Requested Tray setting on the product is set to Exclusively, and the requested tray is empty. The product will not use another tray.

Load the requested tray.

Or, change the setting from Exclusively to First on the Manage Trays menu. The product can use other trays if no media is loaded in the specified tray.

Paper does not feed from Tray 2, 3, 4, 5, or 6

Paper does not feed from Tray 2, 3, 4, 5, or 6

Cause	Solution

The correct size paper is not loaded.	Load the correct size paper.

ENWW	Solve paper-handling problems 517

Image 541

HP Enterprise CP5525 manual Product pulls from incorrect tray, Paper does not feed automatically

Contents

HP Color Laserjet Enterprise CP5520 Page HP Color LaserJet Enterprise CP5520 Printer Series Trademark Credits Copyright and License Conventions used in this guide Conventions used in this guide Table of contents Enww Removal and replacement 101 Enww Solve problems 253 Enww 294 Xiii 414 Enww 459 Xvii 480 Xix Parts and diagrams 551 Appendix B Product specifications 641 Appendix a Service and support 631Appendix C Regulatory information 643 Index 655 Theory of operation Basic operation Product block diagramMajor product systems Normal sequence of operation Sequence of operation1Sequence of operation Name Timing Purpose Print Formatter-control system Sleep mode Memory Input/outputPJL overview Firmware Control panel PML 2Engine-control system Engine-control system DC controller 3DC controller diagram Component type Abbreviation Name 2Electrical components Enww Motors Motors Description Components driven Failure Detection Motors Description Area cooled Type Speed Fans TH4 Fuser Heater Fuser-control circuit 7Fuser-heater control circuit Fuser temperature control Fuser protective function Fuser failure detection SW1 Low-voltage power supply Enww Overcurrent/overvoltage protection 9High-voltage power supply High-voltage power supply Enww 10Laser/scanner system Laser scanner system Laser failure detection Electrophotographic process Image-formation system 12Electrophotographic process drive system 13Image formation process Image formation process Pre-exposure Latent-image formation blockPrimary charging 16Laser beam exposure Laser beam exposure 17 Developing Developing block Primary transfer Transfer blockSecondary transfer Separation Fusing block Drum cleaning block ITB cleaning block Print cartridges 24Print cartridge block diagram Cartridge presence detection Memory tagToner level detection Cartridge life detection 25Developing unit engagement and disengagement control ITB ITB unit Primary transfer roller engagement and disengagement control ITB unit presence detection ITB cleaning mechanism SW6 ITB Calibration 29Color-misregistration control Color-misregistration control Image stabilization control Environment change controlImage density control Dmax Image halftone control Dhalf 30Pickup, feed, and delivery system Pickup, feed, and delivery system 31Pickup, feed, and delivery system blocks Photo sensors Photo sensors and switches productDescription Pickup and feed block Motors and solenoids6Motors and solenoids paper path 34Tray 2 cassette pickup operation Tray 2 cassette pickup 35Tray 2 cassette multiple-feed prevention Tray 2 cassette multiple-feed prevention Enww Tray 2 cassette lift-up operation 36Tary 2 cassette lift-up operation Cassette media-presence detection Tray 1 MP tray paper pickup SL2 Tray 1 MP tray last-paper detection 39Tray 1 MP tray last-paper detection Paper feed 40 Paper feed 41Skew-feed prevention Skew-feed prevention Media detection sensor types Media detection Auto Sense mode Print mode Media Speed Sensor Detection Fusing and delivery blockFeed-speed control Loop control 42 Loop control Pressure roller pressurization and depressurization control 44Output bin full detection Output bin full detection Duplex reverse and duplex feed control Duplex block duplex models only SL3 Duplex operation Print mode Duplex print Paper size Duplexing media feed modePaper sizes, duplex operation Print modes, duplex operation Product detects the following jams Jam detection After the TOP sensor detects the trailing edge 48Paper-feeder paper path Paper feeder 10Paper-feeder motors Paper-feeder motorsMotor Driving part Failure detection 11Paper-feeder electrical components Paper-feeder paper pickup and feedComponent type Abbreviation Description Paper-feeder cassette lift operation SR3 Paper-feeder jam detection 543X500-sheet paper deck Optional 3X500-sheet paper deck Component Description 3X500-sheet paper deck 133X500-sheet paper deck 14Paper deck motors Motor controlComponent Component driven Failure Detection Pickup-and-feed operation Component Signal15Pickup-and-feed operation Paper Deck Cassette 3 Pickup Motor Control Cassette lift-up operation 58Cassette lift-up operation 59Jam detection Enww Removal and replacement Introduction Removal and replacement strategyElectrostatic discharge 1Phillips and pozidrive screwdriver comparison Required tools Before performing service Service approachAfter performing service Post-service test Replace print cartridges Removal and replacement procedures Enww Enww Close the front door Removal and replacement 3Remove the toner-collection unit 2 Toner-collection unit Enww Administration Manage Supplies Reset Supplies New Fuser Kit Reset the New Fuser Kit setting at the control panelFuser Pickup roller Tray 7Remove the pickup roller Tray 1 2 Removal and replacement Separation pad Tray Insert the tool under the separation pad 13Remove the separation roller assembly Tray 2 2 Separation roller assembly Tray Open Tray Open the right-door assembly 15Remove the 1 x 500 or 3 x 500 rollers 1 Enww Secondary transfer roller Intermediate transfer belt ITB Enww Reset the New Transfer Kit setting at the control panel 21Remove the formatter 1 Formatter PCA Enww Before proceeding, remove the following components Hard DriveIdentify the hard drive type Remove the encrypted HDD 26Remove the solid-state hard drive 1 Remove the solid-state hard drive Remove the lock from the PCA Identification and location CoversExternal panels, covers, and doors 1External panels, covers, and doors 31Remove the right-front cover and control-panel assembly 2 Right-front cover and control-panel assembly Enww Left cover Remove the rear cover Rear cover 36Remove the toner collection unit access door 2 Toner collection unit access door Enww 38Remove the right-rear cover Right-rear cover 39Right-rear cover ground spring Removal and replacement Reinstall the right-rear cover Remove the top cover Top cover Enww 42Remove the front-door assembly 1 Front-door assembly 44Remove the front-door assembly 3 Removal and replacement 45Remove the front-door assembly 4 46Remove the right-door assembly 1 Removal and replacement Right-door assembly 48Remove the right-door assembly 3 Disconnect two connectors callout 51Remove the right-door assembly 6 Formatter case Main assembliesRemove the formatter case 53Remove the formatter case assembly 2 Remove the laser/scanner assembly Laser/scanner assembly 56Remove the laser/scanner assembly 3 Enww Remove the paper pickup assembly Paper pickup assembly Disconnect four connectors callout 61Remove the paper pickup assembly 4 Reinstall the paper pickup assembly 63Paper pickup assembly sensor flag correctly installed Reset the New Registration Roller menu item Installing a replacement paper pickup assemblyDevice Maintenance Service Service Access Code Reset the Media Sensor Value Enww Remove the registration sensor assembly Registration sensor assembly Enww Enww Remove the lifter-drive assembly Lifter-drive assembly Enww Enww ITB front guide assembly 75Remove the ITB front guide assembly 3 Enww 77Remove the ITB rear guide assembly ITB rear guide assembly Remove the residual toner full sensor Residual toner full sensor 79Remove the residual toner full sensor 2 80Remove the residual toner full sensor 3 Reinstall the residual toner full sensor Enww Remove the main drive assembly Main drive assembly 87Remove the main drive assembly 3 Removal and replacement 89Remove the main drive assembly 5 90Remove the main drive assembly 6 Removal and replacement 92Remove the main drive assembly 8 94Remove the main drive assembly 10 Removal and replacement 96Remove the main drive assembly 12 98Remove the main drive assembly 14 Removal and replacement 100Remove the main drive assembly 16 101Remove the main drive assembly 17 Removal and replacement 102Install the main drive assembly 1 Install the main drive assembly 104Install the main drive assembly 3 Removal and replacement See -103 Install the main drive assembly 2 of 8 on 108Install the main drive assembly 7 Removal and replacement 109Install the main drive assembly 8 Remove the fuser drive assembly Fuser drive assembly Disconnect two connectors callout Original fuser drive assembly Proceed to the next step Install a replacement fuser drive assembly Enww Remove the fuser gear assembly Fuser gear assembly 118Remove the fuser gear assembly 3 120Remove the fuser gear assembly 5 Removal and replacement 122Remove the fuser gear assembly 7 Enww 124Remove the fuser gear assembly 9 Original fuser gear assembly Proceed to the next step Install a replacement fuser gear assembly Enww Remove the delivery assembly Paper delivery assembly Reinstall the paper delivery assembly 129Remove the paper delivery assembly 2 Enww Remove the duplex-drive assembly Duplex drive assembly duplex models Remove three screws callout Remove the delivery drive assembly Delivery drive assembly simplex models Remove the residual-toner-feed assembly Residual-toner-feed assembly 138Remove the residual-toner-feed assembly 2 Remove the ITB motor ITB motor M1 140Remove the ITB motor 2 Remove the drum motor Drum motor M2 Remove the developing motor Developing motor M3 Remove the fuser motor Fuser motor M4 Remove the developing-disengagement motor Developing-disengagement motor M6 Remove the power-supply fan Power-supply fan FM1 Enww Enww Remove the fuser fan Fuser fan FM2 150Remove the fuser fan 3 Removal and replacement Enww Remove the formatter fan and ICB PCA Formatter fan FM3 and ICB PCA 154Remove the formatter fan 3 Enww Remove the DC controller PCA DC controller PCA Enww Remove the low-voltage power supply Enww 162Remove the low-voltage power supply 3 Enww Remove the imaging developing high-voltage power supply Imaging developing high-voltage power supply Remove the first transfer high-voltage power supply First transfer high-voltage power supply 166Reinstall the first transfer high-voltage power supply Remove the second transfer high-voltage power supply Second transfer high-voltage power supply 168Remove the second transfer high-voltage power supply 2 Remove the driver PCA Driver PCA 170Remove the driver PCA 2 Remove the power switch PCA Power switch PCA Remove the environmental sensor Environmental sensor 500 rear cover 500-sheet paper feeder assembly 175Remove the 1 x 500 left cover 2 500 left cover Enww 500 right-front cover 500 front-upper cover 500 right door 180Remove the 1 x 500 right door 3 Removal and replacement 181Remove the 1 x 500 right-lower cover 500 right-lower cover 500 pickup assembly 184Remove the 1 x 500 pickup assembly 3 Enww 187Remove the 1 x 500 lifter-drive assembly 2 500 lifter-drive assembly 500 pickup motor 188Remove the 1 x 500 pickup motor Removal and replacement 189Remove the 1 x 500 driver PCA 500 driver PCA 190Remove the 3 x 500 rear cover Removal and replacement 500-sheet paper feeder optional accessory 191Remove the 3 x 500 right and left cassette rails 500 right and left cassette rails 500 paper deck controller PCAs 194Remove the 3 x 500 paper deck lifter-drive assembly 2 500 paper deck lifter-drive assembly 500 paper deck pickup motor 196Remove the 3 x 500 front-lower cover 500 front-lower cover 500 left cover 199Remove the 3 x 500 right-corner cover 500 right-corner cover 500 front-upper cover 500 right-door assembly Enww 204Remove the 3 x 500 right-lower cover 500 right-lower cover 500 left-lower cover Remove the 3 x 500 rear-lower cover 500 rear-lower cover Remove the 3 x 500 paper deck pickup assembly 500 paper deck pickup assembly Enww Solve problems Solve problems checklist Solve problems checklist Administration Reports Configuration/Status Pages Current settings pagesPrint the current settings pages Menu map Sign In menu Control panel menusRetrieve Job From USB menu Retrieve Job From Device Memory menu 3Retrieve Job From Device Memory menu Supplies menu4Supplies menu Enww Trays menu Trays menu General Settings menu Administration menu7General Settings menu Reports menu Enww Enww Enww Enww Print Settings menu Retrieve From USB Settings menu8Retrieve From USB Settings menu Print Settings menu Print Options menu 9Print Settings menu10Print Options menu Product supports Enww Display Settings menu Display Settings menu 12Manage Supplies menu Manage Supplies menu 13Manage Trays menu Manage Trays menu 14Network Settings menu Network Settings menu15Embedded Jetdirect Keep Embedded Jetdirect First level 16Troubleshooting menu Troubleshooting menu Backup/Restore menu Device Maintenance menu USB Firmware Upgrade menu Calibration/Cleaning menu17Backup/Restore menu Calibration/Cleaning menu Automatic Calibrations Disabled Enabled Service menu Determine the problem source Troubleshooting processPre-troubleshooting checklist General topic Questions Troubleshooting flowchart Troubleshooting flowchart Power-on checks Power subsystemPower-on troubleshooting overview Boot sequence Power-on timing approximate Component diagnostics Tools for troubleshootingLED diagnostics Understand lights on the formatter Heartbeat LED Engine diagnostics Defeat the right-door opening/closing sensor PS15 Defeating interlocks Administration Troubleshooting Diagnostic Tests Disable cartridge check Engine test button Paper-path test Sensor or switch name Sensor or switch number 20Manual sensor diagnostic testsManual sensor test Developer alienation sensor PS11 ITB alienation sensor Front-door opening/closing switch PS14 Right-door opening/closing sensor PS15 5Test the right-door opening/closing switch 1 Solve problems Enww TOP top-of-page sensor PS5 Fuser loop sensors 1 and 2 PS7 and PS8 Fuser pressure-release sensor PS9 Fuser output sensor PS6 Developer alienation sensor PS11 ITB alienation switch SW5 21Tray/Bin manual sensor test Tray/Bin manual sensor test Enww Tray 1 paper sensor PS2 Tray 2 paper present sensor PS1 Tray 2 paper surface sensor PS4 Tray 2 paper size switches SW7 and SW8 Tray 3 paper sensor SR3 Tray 3 paper surface sensor SR2 Tray 3 paper size sensors SW2 and SW3 Tray 3 feed sensor SR1 Tray 3 door opening/closing sensor SW1 Tray 4 paper surface sensor SR2 Tray 4 paper sensor SR3Tray 4 paper size sensors SW2 and SW3 Tray 4 feed sensor SR1 Tray 5 paper surface sensor SR82 Tray 5 paper sensor SR83Tray 5 paper size sensors SW82 and SW83 Tray 5 feed sensor SR81 Output-bin-full sensor PS10 Paper-path sensors test Print/stop test 22Paper-path sensors diagnostic testsComponent tests Component test special-mode test 23Component tests 1 Fuser Contact/Alienation Drive Switchback MotorTrayX Pickup Motor DuplexerPickup Motor Full/half speed intake fan Additional component tests24Component tests 2 Speed controlled intake fan Full speed intake fanComponent test Component tested Comments Fuser Fan Formatter Fan Block diagrams Diagrams 26Optional paper feeder Tray 3 cross section Plug/jack locations DC controller connections Location of connectorsDC controller connections 25DC controller connections 28Product connections 1 Product connections 29Product connections 2 30Product connections 3 31Product connections 4 32Product connections 5 33Product connections 6 34Paper feeder connections 35External component locations Locations of major components 36Major component locations 1 Main drive unit Lifter drive unit 37Major component locations 2 38Major component locations 3 39Motors, fans, and rollers component locations 40PCA component locations Timing chart 1 General timing charts 42General timing chart 2 Fuser General circuit diagram 44 General circuit diagram 2 Paper feeder general circuit diagram 1 X 46Paper deck general circuit diagram 3 X Administration Troubleshooting Print Quality Pages Print-quality-troubleshooting pagesInternal print-quality test pages Yellow Green 50Black print-quality troubleshooting Diagnostics Enww Process a cleaning Clean the paper pathDevice Maintenance Calibration/Cleaning Set up an auto cleaning Configuration Configuration 51Configuration HP embedded Jetdirect Security Settings information 26Important information on the configuration pages Finding important information on the configuration pagesAccessories and internal storage Diagnostics menu Color-band test Repetitive image-defect ruler Print quality troubleshooting tools Calibrate the product 27Sign In menu Sign In menuPersonal identification number PIN Might not be available Retrieve Job From USB menu 29Retrieve Job From Device Memory menu Retrieve Job From Device Memory menu Supplies menu Settings Cartridge Prompt toSupplies menu 30Supplies menu Color/Black Auto Transfer Kit Very Low StopMix Mostly Color Trays menu Alternative Letterhead Disabled Mode Enabled Use another tray Enabled DisabledSize/Type Prompt Display Do not display Blank Pages Auto Reports menu Administration menu31Trays menu 32Reports menu Other Pages Print Map 33General Settings menu General Settings menu Midtones Cyan Density Enww Sets the sensing option for Tray 1 for paper types using Adjust Paper When ExpandedSense Mode Sensing Humidity Mode Normal High Optimize Normal Paper Standard Paper Curl Mode NormalLight Media Normal Envelope Control Normal Cleaning Control NormalEnvironment Normal Line Voltage Normal Low Voltage When thin vertical When a backgroundWhen the other Correct the problem Moisture Control Normal Alternate Alternate Alternative 1 to Normal is Jam Recovery AutoMaximum is Week Default Folder Held Timeout HourQuick Copy Job Off Name for Stored Restrict Color Enable Settings Calibration Print Settings menu Retrieve From USB Settings menuRetrieve From USB Settings menu Font Pitch Range 0.44 Default = 35Print Settings menuAppend CR to LF Yes Dimension Range 5.00 Default = Default Custom Paper Inches DimensionPrint Options menu 36Print Options menu Enable Edge to Edge Enabled Dimension Range 127 Default =Overrides Disabled Millimeters Display Settings menu Manage Supplies menu Supply Settings Black Cartridge Very Low Stop38Manage Supplies menu Status menu to Notifies you when Color/Black Mix Auto Mostly Color Pages Mostly Black 39Manage Trays menu Manage Trays menuFirst level Values Alternative Letterhead Mode Disabled Use another tray EnabledFirst level Values Description Manually Feed Prompt Always Size/Type Prompt Display First level Values Description Blank Pages Auto Network Settings menu Network Settings menuFirst level Values Description Timeout Method Default IP Auto IPRelease and Dhcp Renew Release Address Manual Enable 0.0 IPv6 Settings EnableSettings Off Xxx.xxx.xx Secondary Router Router Router Specified PolicyRouter Unavailable If a Https Optional Access Idle Timeout The time802.1x Reset 00080 Test Diagnostics Embedded LAN HW Test YesHttp Test Yes Select All Yes Data Path YesTests Execution Print Results Yes 127.0.0.1 Dest IPv6Ping Results Packets Sent 00000 Ping Yes Progress Enww 42Troubleshooting menu Troubleshooting menu Paper Path Test Print Test SensorsTest Duplex Path Off Number Sensor Test Repeat option Repeat Off Diagnostic DataRetrieve Export to USB Debug Cleanup Debug OffInformation File Include Crash Off Backup/Restore menu Device Maintenance menu43Backup/Restore menu Backups Cleaning Interval setting Calibration/Cleaning menu 44Calibration/Cleaning menu USB Firmware Upgrade menu Cycle Counts Mono Cycle Counts Service menuRefurbish Cycle Glass Cleaning Cold Reset Paper LetterNew Registration Yes Roller Memory error 10.0X.Y0 Supply memory errorDescription Label missing 10.22.51 10.22.5010.22.52 10.23.50 10.23.52 10.23.51Printing past very low 10.XX.34 Used supply in use 10.XX.40 Genuine HP supplies installed 10.XX.70 Printing past very low 10.XX.41 Unsupported supply in use 10.YY.25 Wrong cartridge in color slot 10.YY.15 Install supplyFuser kit 10.31.15 10.YY.35 Incompatible supply 13.00.00 YY Internal clock error13.A3.FF 13.D3.DZ 13.WX.FF 13.WX.EE 13.WX.YZ Fuser area jam 13.WX.YZ Fuser wrap jam 13.WX.YZ Jam in lower right door 13.WX.YZ Jam below control panel 13.WX.YZ Jam in right door 13.WX.YZ Jam in middle right door 13.WX.YZ Jam in Tray Too complex Insufficient memory To continue, press OK32.1C.XX Enww Recommended action Enww Enww 32.21.00 Unsupported USB accessory detected To continue, press OKUSB I/O buffer overflow To continue, press OK Embedded I/O buffer overflow To continue, press OK Embedded I/O bad transmission To continue, press OK ErrorYZ Unexpected size in tray LBP OHT YZ Unexpected type in tray LBP OHT YZ Error To continue, press OK Enww 47.00.XX 42.XX.YY47.01.XX 47.02.XX 47.03.XX 47.WX.YZ Printer calibration error To continue, press OK47.04.XX 47.05.00 47.FC.23 Recommended action = 1 or W = 50.WX.YZ Fuser error To continue, turn off then on Enww = B = a 52.XX.00 Error To continue, turn off then on YY Error Recommended action 54.00.03 54.XX.YY Error54.00.06 or 54.00.14 or 54.01.05 54.0X.07 54.11.05 or54.0X.0B or 54.0X.0C 54.0X.0D or 54.0X.0E YY DC controller error To continue, turn off then on YY Error To continue, turn off then on 55.0X.YY DC controller error To continue, turn off then on57.00.0Y Error To continue, turn off then on Recommended action 57.00.01 57.00.03 57.00.02Recommended action 59.00.30 or 59.00.90 or 59.00.A0 59.00.F0 59.0X.50 Error To continue, turn off then onRecommended action 59.05.50 59.06.50 or 59.07.50 or 59.0X.70 Error To continue, turn off then on 59.0X.60 Error To continue, turn off then on59.0X.80 Error To continue, turn off then on Recommended action 50.05.80 60.00.0Y Tray Y lifting error50.06.80 or 50.07.80 or Recommended action 60.00.02 60.00.05 or 61.00.01 80.0X.YY Embedded JetDirect error Error To continue, turn off then onNo system To continue, turn off then on Enww Corrupt data in solutions volume Corrupt data in firmware volumeCorrupt data in configuration volume Corrupt data in job data volume Upgrade not performed timeout during receive Upgrade not performed file is corruptUpgrade not performed error writing to disk Upgrade not performed error reading upgrade Upgrade not performed the file is invalid Upgrade canceled by user 99.00.2X Unknown disk Unsupported disk No disk data installed Disk data errorDisk is not bootable please download firmware Incorrect disk Binname Full Remove all paper from bin 99.XX.YYSupply almost full Supply low or Supplies low Supplyvery low or Supplies very low Tray X lifting File System file operation failed To clear, press OK File System device failure To clear, press OKFile System file system is full To clear, press OK File System is not initialized Canceling Calibration reset pendingCanceling... jobname Bad optional tray connection Cleaning Cleaning do not grab paperChecking engine Checking paper path Clearing paper path Clearing event logClose front door Close lower right door Close right door Close middle right doorClose upper right door For help press ? Cooling device Data received To print last page, press OK Creating cleaningEIO X disk initializing EIO X disk not functional EIO X disk spinning up HP Secure Hard Drive disabledEvent log is empty Expected drive missing Incompatible supplies Incompatible supplyInitializing Install supply Close rear door Install supplyInstall Fuser Unit Install Transfer Unit Install suppliesInternal disk not functional Load Tray X Type, Size Internal disk spinning up Load Tray X Type, Size To use another tray, press OK Loading program XX Do not power offManually feed Type, Size Manually feed Type, Size To use another tray, press OK No job to cancelMoving solenoid Moving solenoid and motor Performing Color Band Test PausedPerforming Paper Path Test Please wait Printing Diagnostics Printing ConfigurationPrinting Color Usage Log Printing Demo Printing Font List Printing File DirectoryPrinting Fuser Test Printing Help Printing Registration Printing PQ TroubleshootingPrinting RGB Samples Printing stopped Processing... filename Processing duplex job Do not grab paper until job completesProcessing... copy X of Y Ready IP Address ReadyRemove all print cartridges Remove at least one print cartridge Replace supply Replace supplies Restore Factory Settings Rotating color motor Restricted from printing in colorRotating motor Size mismatch in Tray Supplies in wrong positions Sleep mode onTray X empty Type, Size Tray X open Tray X overfilled TroubleshootingType mismatch Tray Unsupported drive installed To continue, press OK Unsupported USB accessory detected Remove USB accessory Unsupported tray configurationUSB accessory not functional Wrong cartridge in color slot 53Sample event log Event-log messages Print the event log from the Service menu Print the event log from the Administration menuView an event log from the Administration menu Print an event log Clear an event log Viewing the event log from the Service menu Clear jams Product is jammed Cause SolutionCommon causes of jams 54Jam locations Jam locations 46Paper path jam sensors 500-sheet feeder use a SR1 tray feed sensor Jam event code Jammed paper location 47Event codes for jams Fuser modes for jam event codes Z Enww Clear jams in the upper-right door Enww Clear jams in the lower-right door Clear jams in Tray Enww Clear jams from Tray 2, Tray 3, or an optional tray Clear jams in the output bin area Jams in the output bin Jam causes and solutionsJams in the fuser and transfer area 52Causes and solutions for duplexing reverse jams 51Causes and solutions for fuser delivery stationary jams53Causes and solutions for duplex repick jams Jams in the duplex area duplex models only 55Causes and solutions for pickup delay jam 1 tray pickup 54Causes and solutions for residual media jamsJams in Tray 1, Tray 2 and internal paper path Door assembly. See Right-door assembly on 56Causes and solutions for pickup delay jams Tray Causes and solutions for residual media jams 57Causes and solutions for pickup stationary jams Jams in Tray 3, 4, 5, 58Causes and solutions for residual media jams Replace any defective parts Set the jam recovery feature Change jam recoveryAdministration General Settings Jam Recovery Product feeds multiple sheets Cause Solution Solve paper-handling problemsProduct feeds incorrect page size Cause Solution Product feeds multiple sheets Paper does not feed automatically Cause Solution Product pulls from incorrect tray Cause SolutionProduct pulls from incorrect tray Paper does not feed automatically Transparencies or glossy paper will not feed Cause Solution Paper does not feed from Tray 2, 3, 4, 5, or Cause SolutionTransparencies or glossy paper will not feed Envelopes jam or will not feed in the product Output is curled or wrinkled Cause SolutionOutput is curled or wrinkled Product will not duplex or duplexes incorrectly Set to Up to resolve print-quality issues caused by poor 61MP modes under the Adjust Paper Types sub menuUse manual print modes Or rough surface media 62MP modes under the Optimize submenu Humidity Mode Media Temp Print quality examples Solve image-quality problems Problem Sample Cause Solution Item in the Calibration/Cleaning Execute the Clean Laser GlassMaintenance menu Defective Power-supply Enww Cleaning kit CC468-67919 is Clean the paper path Clean the productSet up an auto cleaning Problem Cause Solution Solve performance problemsSupplies very low message is Solve direct-connect problems Solve connectivity problemsSolve network problems Problem Solution Service menu Service mode functions Automatic Calibrations Test Support Continuous Print from Restore factory-set defaults Product resetsRestore factory-set defaults values Partial Clean Clean Disk and Partial Clean functionsActive and repository firmware locations Print Characteristics of a Partial Clean Clean DiskReasons for performing Partial Clean Execute a Partial Clean Execute a Clean Disk Reasons for performing Clean Disk Access the Preboot menu Preboot menu optionsCold reset using the Preboot menu 63Preboot menu options 1 Partial Clean Clean DiskPassword Clear Password 64Preboot menu options 2 Disk Device 65Preboot menu options 3External 66Preboot menu options 4 67Preboot menu options 5 68Preboot menu options 5 Determine the installed revision of firmware Product updatesPerform a firmware upgrade Embedded Web Server USB storage device Preboot menu USB storage device control-panel menu Enww Parts and diagrams Order parts, accessories, and supplies Order parts by authorized service providers1Order parts, accessories, and supplies Supplies part numbers Customer self repair parts3Supplies part numbers Description Part number Enww Part number CSR level Solid state drive kit CE707-67901 Service replacement parts Fuser drive unit CE707-67904 4Accessories part numbers Accessories part numbers How to use the parts lists and diagrams Assembly locations 1External covers, panels, and doors External covers, panels, and doors Description Part number Qty External covers, panels, and doors Simplex Model Right door assembly Right door assembly 3Internal components 1 Internal components 1 7Internal components 1 4Internal components 2 Internal components 2 8Internal components 2 Duplex Model Internal components 3 9Internal components 3 6Internal components 4 Internal components 4 10Internal components 4 7Internal components 5 Internal components 5 11Internal components 5 8Internal components 6 Internal components 6 12Internal components 6 9Internal components 7 Internal components 7 13Internal components 7 10Internal components 8 Internal components 8 14Internal components 8 11Internal components 9 Internal components 9 15Internal components 9 1x250 cassette 121x250 cassette Parts and diagrams Description Part number Qty Cassette CE710-67906 1x250 cassette 13Paper pick-up assembly Paper pick-up assembly Paper pick-up assembly 14Paper delivery assembly Parts and diagrams Paper delivery assembly Paper delivery assembly 15 PCAs Printed circuit assemblies PCAs 1x500PF external components 1x500 paper feeder 1x500PF external components 171x500PF internal components 1x500PF internal components 1x500PF internal components 18 1x500PF PCA 1x500PF PCA 22 1x500PF PCA 3x500PF external components 3x500 paper feeder 3x500PF external components 20 3x500PF internal components 3x500PF internal components 3x500PF internal components 3x500PF cassette 213x500PF cassette Parts and diagrams Description Part number Qty Cassette 3x500PF RM1-6942-000CN 3x500PF cassette 22 3x500PF PCAs 3x500PF PCAs 263x500PF PCAs 27Alphabetical parts list Alphabetical parts list Internal components 3 Internal components 2 PCAs on 3x500PF PCAs on Gear, 25T, duplex model RU6-0772-000CN Guide, slide RC2-7203-000CN Imaging high-voltage PCA RM1-6800-000CN Lifter plate assembly, Tray RM1-6043-030CN Paper delivery assembly Rail, cassette, right 3x500PF RL1-1390-000CN Sensor, right door WG8-5696-000CN Spring, tension, front RU6-2727-000CN 28Numerical parts list Numerical parts listPart number Description RC2-6547-000CN Guide, fuser, rear RC2-6650-000CN Cover, main cross-member cable RC2-6715-000CN Hinge, front cover, right RC2-6842-000CN Guide, cable, right RC2-7201-000CN Slider, push RC2-9331-000CN Cover, left 1x500PF RK2-2276-000CN Fan, power supply RM1-6012-000CN Waste toner cover assembly RM1-6742-000CN Driver PCA duplex model RM1-6944-000CN Paper pick-up assembly 1x500PF RM1-7914-060CN Gear assembly, fuser RU6-2744-000CN Spring, tension, rear Enww Service and support Hewlett-Packard limited warranty statement Enww Enww Data stored on the print cartridge End User License Agreement Transfer Customer self-repair warranty service Customer support Enww Product specifications Table B-1Product dimensions Physical specificationsProduct Height Depth Width Weight Environmental condition Recommended Allowed Regulatory information FCC regulations Environmental product stewardship program United States and Puerto Rico Return and recycling instructionsNon-U.S. returns Material restrictions PaperHP Color LaserJet Enterprise CP5520 Printer Series Enww Declaration of Conformity October Boise, Idaho USAFor regulatory topics only Types of memory Certificate of VolatilityVolatile memory Non-volatile memory Laser safety Safety statementsVcci statement Japan Power cord instructions Power cord statement Japan Varoitus Luokan 1 laserlaite Varo GS statement Germany Accessories Symbols/Numerics LED Msds Recycling Quality Sensor SW1 483 Supplies menu, control panel 258 Support Online 639 Page CE707-90935* *CE707-90935