HP Enterprise CP5525 manual 187Remove the 1 x 500 lifter-drive assembly 2

1x 500 lifter-drive assembly

1.Remove the cassette from the feeder, and then remove the rear cover (see 1 x 500 rear cover on page 222).

2.Disconnect two connectors (callout 1).

Figure 2-186Remove the 1 x 500 lifter-drive assembly (1 of 2)

1

3.From the front, inside the tray cavity, remove three screws (callout 1), release one tab (callout 2), and then remove the 1 x 500 lifter-drive assembly (callout 3).

Figure 2-187Remove the 1 x 500 lifter-drive assembly (2 of 2)

2

3

1

ENWW Removal and replacement procedures 233