HP Enterprise CP5525 manual Separation roller assembly Tray

Separation roller assembly (Tray 2)

CAUTION: Do not touch the spongy roller surface unless you are replacing the roller. Skin oils on the roller can cause paper pickup problems.

1.Remove Tray 2 from the product.

2.Open the right-door assembly.

3.On the separation roller assembly, slide the lever (callout 1) toward the unlocked icon until it clicks into the unlocked position.

Figure 2-12Remove the separation roller assembly (Tray 2) (1 of 2)

1

4.Pull the separation roller assembly up and remove it from the product.

Reinstallation tip When you install the separation roller assembly, make sure that it snaps into the locked postion.

Figure 2-13Remove the separation roller assembly (Tray 2) (2 of 2)

ENWW Removal and replacement procedures 97