HP Enterprise CP5525 manual Data Path Yes, Select All Yes, Tests, Execution, Time, Execute Yes

Table 3-41	Embedded Jetdirect (continued)
First level	Second level Third level	Fourth level	Fifth level	Values	Description
	SNMP Test			Yes	This test checks operation of
				No*	SNMP communications by
					accessing predefined SNMP
					objects on the product.
					Select Yes to choose this test,
					or No to not choose it.
	Data Path			Yes	This test helps to identify data
	Test			No*	path and corruption problems
					on an HP postscript level 3
					emulation product. It sends a
					predefined PS file to the
					product, However, the test is
					paperless; the file will not print.
					Select Yes to choose this test,
					or No to not choose it.
	Select All			Yes	Use this item to select all
	Tests			No*	available embedded tests.
					Select Yes to choose all tests.
					Select No to select individual
					tests.
	Execution			Range: 1 – 60	Use this item to specify the
	Time			hours	length of time (in hours) that an
				Default = 1	embedded test will be run. You
					can select a value from 1 to 60
					hours. If you select zero (1), the
					test runs indefinitely until an
					error occurs or the product is
					turned off.
					Data gathered from the HTTP,
					SNMP, and Data Path tests is
					printed after the tests have
					completed.
	Execute			Yes	No: Do not initiate the selected
				No*	tests.

Yes: Initiate the selected tests.

Ping Test	Dest Type	IPv4
		IPv6

This test is used to check network communications. This test sends link-level packets to a remote network host, then waits for an appropriate response. To run a ping test, set the following items:

Specify whether the target product is an IPv4 or IPv6 node.

ENWW Tools for troubleshooting 397