HP Enterprise CP5525 manual Repeat Off, Retrieve Export to USB, Diagnostic Data

Table 3-42Troubleshooting menu (continued)

First level	Second level	Third level	Fourth level	Values	Description
	Component Test			Select from a list of	Use this feature to
				available	exercise individual
				components.	parts independently
					to isolate noise,
					leaking, or other
					issues.
					To start the test,
					select a component.
					The test runs the
					number of times
					specified by the
					Repeat option.
					You might be
					prompted to remove
					parts from the
					product during the
					test. Press the Stop
					button to abort the
					test.
		Repeat		Off*	The test will run the
				On	number of times
					specified by the
					Repeat option.
	Print/Stop Test				Isolates print quality
					faults more
					accurately by
					stopping the product
					in mid-print cycle,
					which allows you to
					see where the image
					begins to degrade.
					This causes a jam
					message that might
					need to be manually
					cleared. A service
					representative should
					perform this test.
Retrieve	Export to USB				Stores product
Diagnostic Data					diagnostic data on a
					portable storage
					device.
					This function is for
					the HP lab use to
					troubleshoot and
					diagnose system
					failures.

404 Chapter 3 Solve problems ENWW