HP Enterprise CP5525 manual paper deck lifter-drive assembly

3 x 500 paper deck lifter-drive assembly

This procedure describes removing the paper deck cassette 1 lifter-drive assembly. Use this procedure for any of the paper deck lifter assemblies.

1.Remove the 3 x 500 rear cover. See 3 x 500 rear cover on page 236.

2.Disconnect two connectors (callout 1).

Figure 2-193Remove the 3 x 500 paper deck lifter-drive assembly (1 of 2)

1

3.Remove all of the cassettes, remove three screws (callout 1), release one tab (callout 2), and then remove the cassette lifter assembly (callout 3).

Figure 2-194Remove the 3 x 500 paper deck lifter-drive assembly (2 of 2)

2

3

1

ENWW Removal and replacement procedures 239