HP Enterprise CP5525 manual Diagnostics Embedded LAN HW Test Yes, Http Test Yes

Table 3-41	Embedded Jetdirect (continued)
First level	Second level	Third level	Fourth level	Fifth level	Values	Description
	Reset				Yes	Specify whether the current
	Security				No*	security settings on the print
						server will be saved or reset to
						factory defaults.
						Yes: Security settings are reset
						to factory defaults.
						No: The current security
						settings are maintained.
Diagnostics	Embedded	LAN HW Test			Yes	This menu provides tests to help
	Test				No*	diagnose network hardware or
						TCP/IP network connection
						problems.
						Embedded tests help to identify
						whether a network fault is
						internal or external to the
						product. Use an embedded test
						to check hardware and
						communication paths on the
						print server. After you select
						and enable a test and set the
						execution time, you must select
						Execute to initiate the test.
						Depending on the execution
						time, a selected test runs
						continuously until either the
						product is turned off, or an
						error occurs and a diagnostic
						page is printed.
						Running this embedded test will
						erase your TCP/IP
						configuration.
						This test performs an internal
						loopback test. An internal
						loopback test will send and
						receive packets only on the
						internal network hardware.
						There are no external
						transmissions on your network.
						Select Yes to choose this test,
						or No to not choose it.
		HTTP Test			Yes	This test checks operation of
					No*	HTTP by retrieving predefined
						pages from the product, and
						tests the embedded Web
						server.
						Select Yes to choose this test,
						or No to not choose it.

396 Chapter 3 Solve problems ENWW