HP Enterprise CP5525 manual Open Tray Open the right-door assembly

Pickup roller (Tray 2)

CAUTION: Do not touch the spongy roller surface unless you are replacing the roller. Skin oils on the roller can cause paper pickup problems.

1.Open Tray 2.

2.Open the right-door assembly.

3.Remove the separation roller assembly (see Separation roller assembly (Tray 2) on page 97)

4.Lift one of the two levers (callout 1) on either side of the pickup roller, and then push the right side of the roller in the direction of the arrow.

Figure 2-14Remove the pickup roller (Tray 2)

1

5.Remove the pickup roller.

Reinstallation tip Insert the left side of the roller into the product first. Make sure that the replacement roller snaps into place.

98 Chapter 2 Removal and replacement ENWW