HP Enterprise CP5525 manual Front-door opening/closing switch PS14

Front-door opening/closing switch (PS14)

NOTE: This switch is also activated by the right door. See Right-door opening/closing sensor (PS15) on page 292. During this test, the right door must remain closed.

1.Open the front-door assembly to disengage the front-door opening/closing switch.

2.Close the front-door assembly, and then check the control panel on the product for sensor response.

TIP: You can leave the front door open and use a folded piece of paper to activate the switch.

Figure 3-4Test the front-door opening/closing switch

3.Check the control-panel display for sensor response.

4.If there is no response, replace the front-door opening/closing microswitch or the cable.

ENWW Tools for troubleshooting 291