HP Enterprise CP5525 manual RTT Min, Ping Yes Progress

Table 3-41	Embedded Jetdirect (continued)
First level	Second level Third level	Fourth level	Fifth level	Values	Description
	Percent Lost			Default = 000	Shows the percent (0 to 100)
					of ping test packets that were
					sent with no response from the
					remote host since the most
					recent test was initiated or
					completed. The default is 0.
	RTT Min			Default = 0000	Shows the minimum detected
					roundtrip-time (RTT), from 0 to
					4096 milliseconds, for packet
					transmission and response. The
					default is 0.
	RTT Max			Default = 0000	Shows the maximum detected
					roundtrip-time (RTT), from 0 to
					4096 milliseconds, for packet
					transmission and response. The
					default is 0.
	RTT Average			Default = 0000	Shows the average round-trip-
					time (RTT), from 0 to 4096
					milliseconds, for packet

transmission and response. The default is 0.

Ping In	Yes
Progress	No*

Shows whether a ping test is in progress. Yes indicates a test in progress, and No indicates that a test completed or was not run.

ENWW Tools for troubleshooting 399