9.Release one tab (callout 1), and then remove the cover (callout 2). Figure 2-93Remove the main drive assembly (9 of 17)

2

1

10.Remove one screw (callout 1), release four tabs (callout 2), and then remove the developing high- voltage power supply (callout 3).

Reinstallation tip When you reinstall the power supply PCA, look through the holes on the PCA (callout 4) and make sure that the contact springs are correctly positioned against the back side of the PCA.

Figure 2-94Remove the main drive assembly (10 of 17)

2

4

3

1

162 Chapter 2 Removal and replacement

ENWW

Page 186
Image 186
HP Enterprise CP5525 manual 94Remove the main drive assembly 10 Removal and replacement