HP Enterprise CP5525 manual Intermediate transfer belt ITB

Intermediate transfer belt (ITB)

CAUTION: Do not touch the black-plastic belt. Skin oils and fingerprints on the belt can cause print- quality problems. Always place the ITB on a flat surface in a safe and protected location.

NOTE: If the ITB assembly is replaced, HP recommends that the secondary transfer roller be replaced also. If both components are replaced at the same time, you must use the control-panel menus to reset the Transfer Kit menu item. See Reset the New Transfer Kit setting at the control panel

on page 104.

1.Open the right-door assembly.

2.Use both hands to grasp the blue levers (callout 1), apply slight downward pressure, and pull the ITB toward you at a downward angle.

Figure 2-18Remove the intermediate transfer belt (1 of 3)

1

102 Chapter 2 Removal and replacement ENWW