DC controller PCA

CAUTION: Do not replace the DC controller PCA and the formatter PCA at the same time. The settings for the DC Controller PCA are stored in the formatter RAM. When you install a new DC Controller PCA, it reads the settings from the formatter.

Before proceeding, remove the following components:

Rear cover. See Rear cover on page 116.

Right-rear cover. See Right-rear cover on page 119.

Remove the DC controller PCA

CAUTION: ESD-sensitive part.

1.Disconnect 22 connectors and six flat cables on the DC controller PCA (callout 1).

Reinstallation tip Two connectors (callout 2) should be empty when the DC controller is reinstalled.

Figure 2-157Remove the DC controller PCA (1 of 3)

1

2

ENWW

Removal and replacement procedures 207

Page 231
Image 231
HP Enterprise CP5525 manual Remove the DC controller PCA