HP Enterprise CP5525 manual 166Reinstall the first transfer high-voltage power supply

2.Disconnect one connector (callout 2), and then remove the first transfer high-voltage power supply PCA (callout 1).

Figure 2-165Remove the first transfer high-voltage power supply (2 of 2)

2

1

Reinstallation tip When you reinstall the power supply PCA, look through the holes on the PCA (callout 1) and make sure that the contact springs are correctly positioned against the back side of the PCA.

Figure 2-166Reinstall the first transfer high-voltage power supply

1

ENWW Removal and replacement procedures 215