HP Enterprise CP5525 manual Media Temp

Table 3-62MP modes under the Optimize submenu (continued)

CLEANING CONTROL	Changes the control of toner purge. Toner purge is executed
	with the CRG in contact with the ITB. Toner purge is executed
	right after this mode is selected at the control panel.
	ALTERNATIVE 1: Use this option when ITB cleaning failure
	occurs during lower coverage printing or when abnormal
	noise occurs from ITB cleaning blade.
MEDIA TEMP	Use ALTERNATIVE 1to preventing media in the output bin
	from sticking together.
UNIFORMITY CONTROL	Set to ALTERNATIVE 1 to improve uniformity on any paper
	type. Set to ALTERNATIVE 2 to improve uniformity on
	normal and light paper types. Set to ALTERNATIVE 3 when
	the other alternatives do not correct the problem.
PRE-ROTATION	Set to ALTERNATIVE 1 when horizontal banding occurs with
	the drum pitch, or when 53 mm band occurs after leaving
	engine for a long period of time.
	Set to ALTERNATIVE 2 when the problems like fade finger
	(trailing edge toner starvation) occur after high coverage
	continuous printing.
REGISTRATION	Set to ALTERNATIVE when color misregistration occurs.
TRANSFER CONTROL	Set to ALTERNATIVE 1 to reduce primary transfer bias and
	to resolve low density or blotchy images. Set to
	ALTERNATIVE 2 to resolve ghosting outlines that look like a
	finger or fingers. Set to ALTERNATIVE 3 when the other
	alternatives do not correct the problem.
MOISTURE CONTROL	Set to ALTERNATE when image failure occurs due to water
	drops.

ENWW Use manual print modes 523