HP Enterprise CP5525 manual paper deck controller PCAs

3 x 500 paper deck controller PCAs

1.Remove the 3 x 500 rear cover (see 3 x 500 rear cover on page 236).

2.Disconnect all of the connectors for the desired PCA.

●The top PCA has seven connectors.

●The middle PCA has six connectors.

●The bottom PCA has five connectors.

3.Remove two screws (callout 1), release two tabs (callout 2), and then remove the PCA. Repeat this procedure for the remaining PCAs.

NOTE: Some connectors (callout 3) on the PCAs are not used.

Figure 2-192Remove the 3 x 500 paper deck controller PCA

2

1

3

238 Chapter 2 Removal and replacement ENWW