Fuser

CAUTION: The fuser might be hot. Allow enough time after turning off the product power for the fuser to cool.

1.Open the right-door assembly.

2.Grasp the handles and squeeze the blue release levers (callout 1). Figure 2-5Remove the fuser

1

2

3.Pull the fuser (callout 2) straight out of the product to remove it.

Reset the New Fuser Kit setting at the control panel

NOTE: Use this procedure to reset the internal page count if a replacement fuser is installed.

1.At the control panel, press the Home button .

2.Open the following menus:

Administration

Manage Supplies

Reset Supplies

New Fuser Kit

3.Use the Down arrow button to highlight the Yes item, and then press OK to select it.

ENWW

Removal and replacement procedures 93

Page 117
Image 117
HP Enterprise CP5525 manual Reset the New Fuser Kit setting at the control panel